Omron S8TS-03012F Power Supply
Omron S8TS-03012F SMPS is a 30 W switch mode power supply designed to provide 12 VDC with 2.5 A rated output current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals and a connector for panel installation and electrical connections. Typical efficiency is specified at 73% with both 100 VAC and 200 VAC input. A green output indicator provides operating status. The 12 VDC output and 2.5 A capacity define this configuration within the S8TS product family. Within the S8TS Series, the S8TS-03012F provides a DIN rail 30 W, 12 VDC configuration. Compare other 12V industrial power supplies from Omron industrial automation.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8TS-03012F |
Omron S8TS-03012F Power Supply - Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 30 W |
| Output voltage | 12 VDC |
| Rated output current | 2.5 A |
| Terminal type | Screw Terminal |
| Mounting method | DIN rail |
| Connection | Connector |
| Efficiency | 73% typ. (at 100 VAC input) 73% typ. (at 200 VAC input) |
| Rated input voltage | 100 to 240 VAC |
| Rated input current | 0.7 A max. (at single operation, 100 VAC input) 0.4 A max. (at single operation, 200 VAC input) |
| Input Leakage current | 0.35 mA max. (at 100 VAC input) 0.7 mA max. (at 240 VAC input) |
| Input Frequency | 50/60Hz |
| Output indicator | Yes (color: green) |
| Output voltage variable range | ±10% (With V.ADJ) |
| Start-up time | 1000 ms typ. (at 100 VAC input) 1000 ms typ. (at 200 VAC input) |
| Hold time | 20 ms min. (at 100 VAC input) 20 ms min. (at 200 VAC input) |
| Vibration resistance | 10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours |
| Shock resistance | 150 m/s2, in each 6 directions 3 times |
| Ambient temperature (Operating) | -10 to 50 ? |
| Ambient temperature (Storage) | -25 to 65 ? |
| Ambient humidity (OperatingStorage) | 25 to 85% |
| Cooling fan | No |
| Weight | 450 g max. |
The Omron S8TS-03012F Power Supply provides 30 W rated power with a 12 VDC output and 2.5 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals and a connector for panel installation. Typical efficiency is specified at 73% with both 100 VAC and 200 VAC input. These values define a 12 VDC configuration where connected equipment voltage, total current demand, source compatibility, DIN rail space, and connection arrangement should be considered together. The connected load should require 12 VDC and remain within the rated 2.5 A output. DIN rail space and connector access should therefore be checked before installation.
The incoming AC range describes source compatibility independently from the 12 VDC requirement of connected equipment. Comparing this model with a 24 VDC unit should begin with output-voltage compatibility rather than wattage or current alone. Models from different voltage classes show available product-family configurations rather than direct replacements. For a 60 W DIN rail model providing 24 VDC at 2.5 A, compare the Omron S8TS-06024.


