+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-G30024C-500 Power Supply

Omron S8FS-G30024C-500 SMPS is a 300 W switch mode power supply designed to provide 24 VDC for industrial control equipment. It delivers 14 A rated output current and uses single-phase input, direct mounting, screw terminals, and terminal blocks for fixed panel installation. Rated input is 100 to 240 VAC, while allowable input extends from 85 to 264 VAC and 80 to 370 VDC. Typical efficiency is 82% at 100 VAC input and 87% at both 200 VAC and 230 VAC input. Within the S8FS-G Series, the S8FS-G30024C-500 provides a direct-mount 300 W, 24 VDC configuration. Compare other 300W 24V power supplies from Omron industrial automation.

Omron S8FS-G30024C-500 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-G30024C-500

Omron S8FS-G30024C-500 Power Supply – Technical Specifications

SpecificationValue
Power rating300 W
Output voltage24 VDC
Rated output current14 A
Terminal typeScrew terminal
PhaseSingle-phase
Mounting methodDirect mounting
ConstructionCovered type
ConnectionTerminal blocks
Efficiency82 % typ. (at 100 VAC input) 87 % typ. (at 200 VAC input) 87 % typ. (at 230 VAC input)
Rated input voltage100 to 240 VAC
Rated input current4.2 A typ. (at 100 VAC input) 2.1 A typ. (at 200 VAC input)
Input Leakage current0.5 mA max. (at 100 VAC input) 1 mA max. (at 200 VAC input)
Input Frequency50/60Hz (47 to 63 Hz)
Allowable input voltage variable range85 to 264 VAC (Single-phase) 80 to 370 VDC
Overvoltage protectionYes, Shut off the input voltage and turn on the input again
Parallel operationNo (However, backup operation is possible, external diodes required.)
Output indicatorYes (color: green)
Output voltage variable range-10 to +15 % (With V.ADJ)
Hold time30 ms typ. (at 100 VAC input) 30 ms typ. (at 200 VAC input)
Vibration resistance10 to 55 Hz, 4.5 G max., 0.375 mm Single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-20 to 70 ?
Ambient temperature (Storage)-25 to 75 ? (with no freezing or condensation)
Ambient humidity (OperatingStorage)90 %RH max.
Cooling fanCooling fan Yes
Weight (Main)700 g max.

The Omron S8FS-G30024C-500 Power Supply provides 300 W rated power with a 24 VDC output and 14 A rated current. It uses single-phase input, direct mounting, screw terminals, terminal blocks, and a covered construction for fixed panel installation. Rated input is 100 to 240 VAC, while allowable input extends from 85 to 264 VAC and 80 to 370 VDC. Typical efficiency is specified at 82% with 100 VAC input and 87% with both 200 VAC and 230 VAC input. These specifications position the model within the 24 VDC class, where output voltage and current demand should be checked before physical installation requirements are considered. The connected equipment should operate from 24 VDC and keep combined current demand within the stated 14 A output capacity.

Direct mounting requires sufficient panel surface, while screw-terminal access should be included when planning conductor routing. The allowable AC and DC input ranges describe source-side compatibility separately from the 24 VDC requirement of connected loads. Comparing another direct-mount model with the same output voltage gives clearer capacity context because the load-voltage requirement remains unchanged while available wattage and current differ. For a higher-capacity direct-mount 24 VDC configuration providing 600 W and 27 A, compare the Omron S8FS-G60024C-500.