Omron S8FS-C01505J Power Supply
Omron S8FS-C01505J SMPS is a 15 W switch mode power supply designed to provide 5 VDC for industrial control equipment. It delivers 3 A rated output current and uses single-phase input, direct mounting, and screw terminals for panel wiring. The metal-frame unit has a stated efficiency of 82% and supports an allowable input range of 85 to 264 VAC or 120 to 370 VDC. Its dimensions are 28 mm wide, 51 mm high, and 78 mm deep, with the terminal block facing upward. Within the S8FS-C Series, the S8FS-C01505J provides a compact 5 V SMPS configuration. Compare 15W SMPS models from Omron industrial power products.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8FS-C01505J |
Omron S8FS-C01505J Power Supply – Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 15W |
| Output voltage | 5V |
| Rated output current | 3A |
| Terminal type | Screw |
| Phase | Single |
| Number of output branches | 1 |
| Allowable supply voltage DC | 120-370 V |
| Mounting method | Direct mounting |
| Type | Metal frame |
| Efficiency | 82% |
| Temperature range | -20-60? |
| Rated supply voltage at AC 50 Hz | 100-240V |
| Height | 28mm |
| Width | 51mm |
| Depth | 78mm |
| Features | Terminal block facing upward |
| Allowable supply voltage AC | 85-264 V |
The Omron S8FS-C01505J Power Supply is a 15 W switch mode power supply designed to provide 5 VDC with 3 A rated output current. It uses single-phase input, direct mounting, and screw terminals for fixed installation inside electrical control panels. The metal-frame unit has a stated efficiency of 82%. Rated supply voltage is 100 to 240 VAC, while the allowable AC input range extends from 85 to 264 V. An allowable DC supply range of 120 to 370 V is also specified. The unit measures 28 mm wide, 51 mm high, and 78 mm deep, with the terminal block facing upward. These specifications define a compact 5 VDC power supply configuration where output current, mounting arrangement, and available installation space must be considered together.
Selection should begin by confirming that the connected load requires 5 VDC and remains within the 3 A rated output. Direct mounting means the available panel surface and mounting arrangement should be checked before installation. Screw terminals provide fixed input and output wiring, while the upward-facing terminal block affects cable access inside the enclosure. The allowable AC and DC supply ranges also help determine whether the incoming source matches the power supply specification. Its 15 W output places the model among lower-power S8FS-C configurations intended for comparatively small DC loads. For a 35 W model providing 12 VDC with 3 A rated current and direct mounting, see Omron S8FS-C03512J.


