+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-C03512J Power Supply

Omron S8FS-C03512J SMPS is a 35 W switch mode power supply designed to provide 12 VDC for industrial control equipment. It delivers 3 A rated output current and uses single-phase input, direct mounting, and screw terminals for fixed panel installation. The metal-frame unit has a stated efficiency of 84% and supports 100 to 240 VAC rated input, with allowable ranges of 85 to 264 VAC and 120 to 370 VDC. Its dimensions are 36 mm wide, 97 mm high, and 99 mm deep, with the terminal block facing upward. Within the S8FS-C Series, the S8FS-C03512J provides a direct-mount 35 W, 12 VDC configuration. Compare other 35W 12V power supplies from Omron control products.

Omron S8FS-C03512J Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-C03512J

Omron S8FS-C03512J Power Supply – Technical Specifications

SpecificationValue
Power rating35W
Output voltage12V
Rated output current3A
Terminal typeScrew
PhaseSingle
Number of output branches1
Allowable supply voltage DC120-370 V
Mounting methodDirect mounting
TypeMetal frame
Efficiency84%
Temperature range-20-60?
Rated supply voltage at AC 50 Hz100-240V
Height36mm
Width97mm
Depth99mm
FeaturesTerminal block facing upward
Allowable supply voltage AC85-264 V

The Omron S8FS-C03512J Power Supply provides 35 W rated power with a 12 VDC output and 3 A rated current for industrial control circuits. It uses single-phase input, direct mounting, and screw terminals for fixed installation inside electrical enclosures. Rated input voltage is 100 to 240 VAC, while allowable ranges extend from 85 to 264 VAC and 120 to 370 VDC. The metal-frame unit has a stated efficiency of 84%. Its enclosure measures 36 mm wide, 97 mm high, and 99 mm deep, with the terminal block facing upward. These characteristics allow the model to be evaluated according to output voltage, current demand, panel space, mounting surface, terminal access, and incoming supply conditions.

The S8FS-C03512J should be matched to equipment requiring 12 VDC within its 3 A rated output capacity. Direct mounting distinguishes this configuration from DIN rail models and should be checked against the available panel layout before installation. The allowable AC and DC input ranges provide flexibility where different incoming power conditions are present. The upward-facing terminal block should also have sufficient wiring clearance above the unit. When comparing alternatives, output voltage should remain the first selection factor, followed by current capacity, rated power, mounting method, and physical dimensions. For the same 12 VDC output with substantially higher current and power capacity, see Omron S8FS-C35012.