Omron S8FS-C01524J Power Supply
Omron S8FS-C01524J SMPS is a 15 W switch mode power supply designed to provide 24 VDC for industrial control and automation equipment. It delivers 0.7 A rated output current and uses single-phase input, direct mounting, and screw terminals for panel wiring. The metal-frame unit has a stated efficiency of 87% and supports an allowable input range of 85 to 264 VAC or 120 to 370 VDC. Its dimensions are 28 mm wide, 51 mm high, and 78 mm deep, with the terminal block facing upward. Within the S8FS-C Series, the S8FS-C01524J provides a compact 24 V SMPS configuration. For different machine-control power requirements, compare 24V power supplies from Omron automation solutions.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8FS-C01524J |
Omron S8FS-C01524J Power Supply – Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 15W |
| Output voltage | 24V |
| Rated output current | 0.7A |
| Terminal type | Screw |
| Phase | Single |
| Number of output branches | 1 |
| Allowable supply voltage DC | 120-370 V |
| Mounting method | Direct mounting |
| Type | Metal frame |
| Efficiency | 87% |
| Temperature range | -20-60? |
| Rated supply voltage at AC 50 Hz | 100-240V |
| Height | 28mm |
| Width | 51mm |
| Depth | 78mm |
| Features | Terminal block facing upward |
| Allowable supply voltage AC | 85-264 V |
The Omron S8FS-C01524J Power Supply is a 15 W switch mode power supply designed to provide 24 VDC with 0.7 A rated output current. It uses single-phase input, direct mounting, and screw terminals for fixed panel installation. The metal-frame unit has a stated efficiency of 87%. Rated supply voltage is 100 to 240 VAC, while the allowable AC input range extends from 85 to 264 V. An allowable DC supply range of 120 to 370 V is also specified. The unit measures 28 mm wide, 51 mm high, and 78 mm deep, with the terminal block facing upward. These specifications define a compact 24 VDC power supply where output requirement, installation space, terminal access, and mounting method must be matched to the control panel.
Selection should confirm that the connected equipment requires 24 VDC and that its combined current demand remains within 0.7 A. Direct mounting differentiates this configuration from DIN rail versions and should be checked against the available panel surface. Screw terminals provide fixed electrical connections, while the upward-facing terminal block should have sufficient wiring clearance. The allowable AC and DC input ranges provide the limits for matching the incoming supply. Its 15 W capacity is intended for comparatively small 24 VDC loads, making current demand an important selection factor. For a higher-capacity 24 VDC model rated at 50 W with 2.2 A output, see Omron S8FS-C05024.


