Omron E3X-HD44 Fiber Optic Sensor
Omron E3X-HD44 is a PNP fiber amplifier designed to process detection signals from compatible fiber optic sensor heads. Its red 4-element LED operates at 625 nm, while digital tuning supports sensitivity adjustment according to target and sensing conditions. An M8 connector provides a compact electrical connection, and the amplifier operates from 12 to 24 VDC for integration with machine control systems. The polycarbonate enclosure provides IP50 protection for suitable industrial mounting locations. The E3X-HD44 belongs to the E3X-HD Series and works as the signal-processing element within the fiber optic sensing range from Omron sensing products, connecting optical detection with a PNP switching output.

| Brand | Omron |
| Product | Fiber Amplifier Unit |
| Model Number | E3X-HD44 |
Omron E3X-HD44 Fiber Optic Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Connection Method | M8 Connector |
| Output | PNP |
| Light Source | Red, 4-element LED (625 nm) |
| Power Supply Voltage | 12 to 24 VDC ±10%, ripple (P-P) 10% max. |
| Materials | Polycarbonate (PC) |
| Degree Of Protection Ip | IEC 60529 IP50 |
| Ambient Illumination Receiver Side | Incandescent lamp: 20,000 lx max., Sunlight: 30,000 lx max. |
| Ambient Temperature Range | Operating: Groups of 1 to 2 Amplifiers: −25 to 55°C, Groups of 3 to 10 Amplifiers: −25 to 50°C, Groups of 11 to 16 Amplifiers: −25 to 45°C Storage: −30 to 70°C (with no icing or condensation) |
| Ambient Humidity Range | Operating and storage: 35% to 85% (with no condensation) |
| Insulation Resistance | 20 MΩ min. (at 500 VDC) |
| Dielectric Strength | 1,000 VAC at 50/60 Hz for 1 minute |
| Vibration Resistance Destruction | 10 to 55 Hz with a 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock Resistance Destruction | 500 m/s2 for 3 times each in X, Y, and Z directions |
The Omron E3X-HD44 Fiber Amplifier processes optical detection signals from compatible fiber sensor heads and provides a PNP switching output for machine control. Its red 4-element LED uses a 625 nm light source, creating the optical signal required by the connected fiber sensing system. Digital tuning supports sensitivity adjustment according to target conditions, while parameter monitoring assists with sensing setup and detection control. The M8 connector distinguishes this model from pre-wired amplifier variants and provides a compact electrical interface for installation. Operating power is 12 to 24 VDC ±10%, and the polycarbonate enclosure carries an IP50 protection rating. The supplied ambient-light capability reaches 20,000 lx for incandescent light and 30,000 lx for sunlight. The important product relationships are PNP output, fiber amplification, digital sensitivity adjustment, M8 connection, optical signal processing and object detection. These entities provide stronger search and selection context than secondary vibration or insulation specifications. Within the E3X-HD family, output type and connection method are particularly useful model-level distinctions. For a closely related E3X-HD PNP fiber amplifier that uses a pre-wired 2 m cable instead of an M8 connector, the E3X-HD41 2M provides the most relevant comparison.

