ATV212HD22N4 - Schneider VFD 22KW
The Schneider ATV212HD22N4 Variable Speed Drive offers a 30 hp motor power, 22 kW, 323…528 Vsupply voltage limits and 1 RJ451 open style connector type. Manufactured by Schneider under the Schneider Variable Speed Drive category, this model belongs to the Altivar212 Series.
| Brand | Schneider |
| Product Type | Variable Speed Drive |
| Model Number | ATV212HD22N4 |
ATV212HD22N4 Schneider VFD 22KW Technical Specifications:
| Specification | Value |
|---|---|
| Connector Type | 1 RJ451 open style |
| Minimum switching current | 3 mA at 24 V DC for configurable relay logic |
| Motor power range AC-3 | 15…25 kW at 380…440 V 3 phases15…25 kW at 480…500 V 3 phases |
| Net weight | 26.4 kg |
| Switching frequency | 6...16 kHz adjustable8...16 kHz with derating factor |
| Output voltage | <= power supply voltage |
| Supply voltage limits | 323…528 V |
| Operating position | Vertical +/- 10 degree |
| Discrete input type | F programmable 24 V DC, with level 1 PLC, impedance: 4700 OhmR programmable 24 V DC, with level 1 PLC, impedance: 4700 OhmRES programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm |
| Speed range | 1…10 |
| [Us] rated supply voltage | 380...480 V - 15...10 % |
| Supply frequency | 50...60 Hz - 5...5 % |
| IP degree of protection | IP20 on upper part without blanking plate on cover conforming to IEC 61800-5-1IP20 on upper part without blanking plate on cover conforming to IEC 60529IP21 conforming to IEC 61800-5-1IP21 conforming to IEC 60529IP41 on upper part conforming to IEC 61800-5-1IP41 on upper part conforming to IEC 60529 |
| Power dissipation in W | 626 W |
| Network frequency | 47.5...63 Hz |
| Electrical connection | VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES: terminal 2.5 mm² / AWG 14L1/R, L2/S, L3/T: terminal 50 mm² / AWG 1/0 |
| EMC filter | Class C2 EMC filter integrated |
| Motor starter type | Variable speed drive |
| Depth | 214 mm |
| Range of product | Altivar 212 |
| Nominal switching frequency | 8 kHz |
| Discrete output type | Configurable relay logic: (FLA, FLC) NO - 100000 cyclesConfigurable relay logic: (FLB, FLC) NC - 100000 cyclesConfigurable relay logic: (RY, RC) NO - 100000 cycles |
| Acceleration and deceleration ramps | Automatic based on the loadLinear adjustable separately from 0.01 to 3200 s |
| Warranty | 18 months |
| Insulation resistance | >= 1 mOhm 500 V DC for 1 minute |
| Frequency resolution | Display unit: 0.1 HzAnalog input: 0.024/50 Hz |
| Tightening torque | 0.6 N.m (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)24 N.m, 212 lb.in (L1/R, L2/S, L3/T) |
| Transmission rate | 9600 bps or 19200 bps |
| Assembly style | With heat sink |
| Motor power hp | 30 hp |
| Dielectric strength | 3535 V DC between earth and power terminals5092 V DC between control and power terminals |
| Regulation loop | Adjustable PI regulator |
| Speed drive output frequency | 0.5…200 Hz |
| Analogue output type | FM switch-configurable voltage 0...10 V DC, impedance: 7620 Ohm, resolution 10 bitsFM switch-configurable current 0...20 mA, impedance: 970 Ohm, resolution 10 bits |
| Analogue input type | VIA switch-configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 10 bitsVIB configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 10 bitsVIB configurable PTC probe: 0...6 probes, impedance: 1500 OhmVIA switch-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 10 bits |
| Ambient air temperature for storage | -25…70 °C |
| Type of cable | Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 90 °C / XLPE/EPRWithout mounting kit: 1 wire(s)IEC cable at 45 °C, copper 70 °C / PVCWith UL Type 1 kit: 3 wire(s)UL 508 cable at 40 °C, copper 75 °C / PVC |
| Type of polarization | No impedance |
| Motor power kW | 22 kW |
| Variable speed drive application selection | Building - HVAC compressor for scrollBuilding - HVAC fanBuilding - HVAC pump |
The Schneider Electric ATV212HD22N4 is a high-performance 22 kW Variable Frequency Drive (VFD) engineered for advanced 3-phase motor control in HVAC and industrial automation systems. As part of the trusted Altivar 212 series, this model supports a wide input voltage range of 380–480 V and integrates a Class C2 EMC filter, ensuring reliable, interference-free operation in complex environments.
With a motor power range of 15–25 kW and robust IP41 protection on the upper part, the ATV212HD22N4 supports adjustable switching frequencies between 6 and 16 kHz. It includes advanced analog and discrete I/O options, configurable PI control loops, and seamless integration into building management systems. A rugged heat sink-based assembly ensures optimal thermal performance under demanding loads.
Ideal for scroll compressors, HVAC pumps, and fans, the Schneider ATV212HD22N4 offers a combination of efficiency, reliability, and smart motor control. To view complete specs or request a quote, visit our Schneider Electric brand page on IndMALL.
Related Products
