Procurement teams shortlist ELECTRIC-ATV212HD11N4 with Lenze Drive, Schneider Modicon M580 PLC and Magelis HMI Software, aligning budget approvals, warranty terms, and multisite availability for smoother rollout across plants.
ATV212HD11N4 - Schneider VFD 11kW
The Schneider ATV212HD11N4 Variable Speed Drive offers a 15 hp motor power, 11 kW, 323…528 Vsupply voltage limits and 1 open style1 RJ45 connector type. Manufactured by Schneider under the Schneider Variable Speed Drive category, this model belongs to the Altivar212 Series.
| Brand | Schneider |
| Product Type | Variable Speed Drive |
| Model Number | ATV212HD11N4 |
ATV212HD11N4 Schneider VFD 11kW Technical Specifications:
| Specification | Value |
|---|---|
| Connector Type | 1 open style1 RJ45 |
| Minimum switching current | 3 mA at 24 V DC for configurable relay logic |
| Motor power range AC-3 | 7…11 kW at 380…440 V 3 phases7…11 kW at 480…500 V 3 phases |
| Net weight | 6.45 kg |
| Switching frequency | 6...16 kHz adjustable12...16 kHz with derating factor |
| Output voltage | <= power supply voltage |
| Supply voltage limits | 323…528 V |
| Operating position | Vertical +/- 10 degree |
| Discrete input type | F programmable 24 V DC, with level 1 PLC, impedance: 4700 OhmR programmable 24 V DC, with level 1 PLC, impedance: 4700 OhmRES programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm |
| Speed range | 1…10 |
| [Us] rated supply voltage | 380...480 V - 15...10 % |
| Supply frequency | 50...60 Hz - 5...5 % |
| IP degree of protection | IP20 on upper part without blanking plate on cover conforming to IEC 61800-5-1IP20 on upper part without blanking plate on cover conforming to IEC 60529IP21 conforming to IEC 61800-5-1IP21 conforming to IEC 60529IP41 on upper part conforming to IEC 61800-5-1IP41 on upper part conforming to IEC 60529 |
| Power dissipation in W | 430 W |
| Network frequency | 47.5...63 Hz |
| Electrical connection | VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES: terminal 2.5 mm² / AWG 14L1/R, L2/S, L3/T: terminal 16 mm² / AWG 6 |
| EMC filter | Class C2 EMC filter integrated |
| Motor starter type | Variable speed drive |
| Depth | 170 mm |
| Range of product | Altivar 212 |
| Nominal switching frequency | 12 kHz |
| Discrete output type | Configurable relay logic: (FLA, FLC) NO - 100000 cyclesConfigurable relay logic: (FLB, FLC) NC - 100000 cyclesConfigurable relay logic: (RY, RC) NO - 100000 cycles |
| Acceleration and deceleration ramps | Automatic based on the loadLinear adjustable separately from 0.01 to 3200 s |
| Warranty | 18 months |
| Insulation resistance | >= 1 mOhm 500 V DC for 1 minute |
| Frequency resolution | Display unit: 0.1 HzAnalog input: 0.024/50 Hz |
| Tightening torque | 0.6 N.m (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)2.5 N.m, 22 lb.in (L1/R, L2/S, L3/T) |
| Transmission rate | 9600 bps or 19200 bps |
| Assembly style | With heat sink |
| Motor power hp | 15 hp |
| Dielectric strength | 3535 V DC between earth and power terminals5092 V DC between control and power terminals |
| Regulation loop | Adjustable PI regulator |
| Speed drive output frequency | 0.5…200 Hz |
| Analogue output type | FM switch-configurable voltage 0...10 V DC, impedance: 7620 Ohm, resolution 10 bitsFM switch-configurable current 0...20 mA, impedance: 970 Ohm, resolution 10 bits |
| Analogue input type | VIA switch-configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 10 bitsVIB configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 10 bitsVIB configurable PTC probe: 0...6 probes, impedance: 1500 OhmVIA switch-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 10 bits |
| Ambient air temperature for storage | -25…70 °C |
| Type of cable | Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 90 °C / XLPE/EPRWithout mounting kit: 1 wire(s)IEC cable at 45 °C, copper 70 °C / PVCWith UL Type 1 kit: 3 wire(s)UL 508 cable at 40 °C, copper 75 °C / PVC |
| Type of polarization | No impedance |
| Motor power kW | 11 kW |
| Variable speed drive application selection | Building - HVAC compressor for scrollBuilding - HVAC fanBuilding - HVAC pump |
The ATV212HD11N4 supports a wide supply voltage range of 380–480 V and features a configurable speed range of 1 to 10, with a maximum output frequency of 200 Hz. It comes with multiple discrete and analog I/O options including configurable relays and 10-bit resolution inputs/outputs. The unit's heat sink assembly, compact depth of 170 mm, and IP20/IP21/IP41 protection ratings make it ideal for control panel integration. It includes built-in protection mechanisms like overload detection, insulation resistance ≥ 1 MΩ, and integrated ground fault detection. The drive is capable of handling 15 HP motors at 480V in three-phase networks, and includes automatic acceleration/deceleration ramps and an adjustable PI regulation loop. Certified to IEC 61800-5-1 and IEC 60529 standards, the drive weighs only 6.45 kg, ensuring easy handling and mounting in vertical positions (±10°).
The Schneider ATV212HD11N4 VFD is ideally suited for building automation, HVAC applications, and energy-efficient motor control systems. It is widely used for fan, pump, and scroll compressor control in commercial and industrial facilities. Thanks to its integrated EMC filtering, high-frequency precision, and support for Modbus transmission at 9600 or 19200 bps, this VFD ensures noise immunity and stable operation. Whether you need reliable motor control for ventilation systems or water circulation in high-rise buildings, the ATV212HD11N4 offers performance, durability, and easy integration.
Related Products
