ATV212HU75N4 | Schneider VFD 7.5 KW | IndMALL Automation
+91 79955 44066 sales@indmall.in

ATV212HU75N4: Schneider VFD 7.5 KW

Technical Specifications of Schneider VFD 7.5 KW ATV212HU75N4:

SpecValue
Connector Type1 open style1 RJ45
Motor power range AC-37…11 kW at 380…440 V 3 phases7…11 kW at 480…500 V 3 phases
Switching Frequency6...16 kHz adjustable12...16 kHz with derating factor
Power Consumption in W291 W

Schneider VFD 7.5 KW ATV212HU75N4 Technical Specifications:

SpecificationValue
Connector Type1 open style1 RJ45
Minimum switching current3 mA at 24 V DC for configurable relay logic
Motor power range AC-37…11 kW at 380…440 V 3 phases7…11 kW at 480…500 V 3 phases
Net weight6.45 kg
Switching frequency6...16 kHz adjustable12...16 kHz with derating factor
Output voltage<= power supply voltage
Supply voltage limits323…528 V
Operating positionVertical +/- 10 degree
Discrete input typeF programmable 24 V DC, with level 1 PLC, impedance: 4700 OhmR programmable 24 V DC, with level 1 PLC, impedance: 4700 OhmRES programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm
Speed range1…10
[Us] rated supply voltage380...480 V - 15...10 %
Supply frequency50...60 Hz - 5...5 %
IP degree of protectionIP20 on upper part without blanking plate on cover conforming to IEC 61800-5-1IP20 on upper part without blanking plate on cover conforming to IEC 60529IP21 conforming to IEC 61800-5-1IP21 conforming to IEC 60529IP41 on upper part conforming to IEC 61800-5-1IP41 on upper part conforming to IEC 60529
Power dissipation in W291 W
Network frequency47.5...63 Hz
Electrical connectionVIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES: terminal 2.5 mm² / AWG 14L1/R, L2/S, L3/T: terminal 16 mm² / AWG 6
EMC filterClass C2 EMC filter integrated
Motor starter typeVariable speed drive
Depth170 mm
Range of productAltivar 212
Nominal switching frequency12 kHz
Discrete output typeConfigurable relay logic: (FLA, FLC) NO - 100000 cyclesConfigurable relay logic: (FLB, FLC) NC - 100000 cyclesConfigurable relay logic: (RY, RC) NO - 100000 cycles
Acceleration and deceleration rampsLinear adjustable separately from 0.01 to 3200 sAutomatic based on the load
Warranty18 months
Insulation resistance>= 1 mOhm 500 V DC for 1 minute
Frequency resolutionDisplay unit: 0.1 HzAnalog input: 0.024/50 Hz
Tightening torque0.6 N.m (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)2.5 N.m, 22 lb.in (L1/R, L2/S, L3/T)
Transmission rate9600 bps or 19200 bps
Assembly styleWith heat sink
Motor power hp10 hp
Request a quote for the Schneider VFD 7.5 KW ATV212HU75N4 at a competitive price. Key technical specifications include a minimum switching current of 3 mA at 24 V DC, with configurable relay logic. Its switching frequency is adjustable from 6...16 kHz, and 12...16 kHz with a derating factor. The sensor functions within a supply voltage range of 323…528 V and maintains an operating position of vertical +/- 10 degrees. It supports a speed range of 1…10, powered by a rated supply voltage of 380...480 V with a tolerance of -15...+10 %. The supply frequency ranges from 50 to 60 Hz with a tolerance of -5...+5 %. Optimized for variable speed drives, it delivers peak performance at 12 kHz. Get in touch today for a quote on the Schneider VFD 7.5 KW—our pricing and support are unmatched.