Before procurement teams confirm PHOENIX-CONTACT-PSR-MC82-5NO-1NC-1DO-24DC-SP, they typically review SMPS Phoenix, Sick Safety Relay and Phoenixcontact Phoenix Contact Psr Scp 24Uc Esl4 3X1 1X2 B to double-check performance ratings, stock availability, and supplier credibility carefully.
Phoenix Contact PSR-MC82-5NO-1NC-1DO-24DC-SP - 2702383 - Safety relays
Technical Specifications of Safety relays PSR-MC82-5NO-1NC-1DO-24DC-SP 2702383

| Brand | Phoenix Contact |
| Product Type | Safety Relays |
| Product | PSR-MC82-5NO-1NC-1DO-24DC-SP |
Phoenix Contact Safety relays PSR-MC82-5NO-1NC-1DO-24DC-SP, 2702383 Technical Specifications
| Specification | Value |
|---|---|
| Note on application | Only for industrial use |
| Product type | Safety relays |
| Product family | PSRmini |
| Application | Extension module |
| Control | 1 and 2 channel |
| Mechanical service life | 10x 106 cycles |
| Relay type | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
| Overvoltage category | III |
| Degree of pollution | 2 |
| Typical response time | < 50 ms (Monitored/manual and auto-start) |
| Typ. starting time with Us | < 50 ms (when controlled via A1/A2) |
| Typical release time | < 25 ms (when controlled via A1/A2) |
| Recovery time | < 100 ms |
| Maximum power dissipation for nominal condition | 15.2 W (at US = 30 V, ILΒ² = 64 AΒ²) |
| Nominal operating mode | 100% operating factor |
| Rated insulation voltage | 250 V AC |
| Inrush current | min. 10 mA |
| Filter time | 4 ms (at A1 in the event of voltage dips at Us) |
| Protective circuit | Surge protection; Suppressor diode |
| Output description | non-safety-related |
| Number of outputs | 1 (digital, PNP) |
| Contact switching type | 1 confirmation current path |
| Contact material | AgSnO |
| Switching voltage | min. 5 V AC/DC |
| Switching capacity | min. 50 mW |
| Limiting continuous current | 100 mA |
| Sq. Total current | 64 A2 (observe derating) |
| Switching frequency | max. 0.5 Hz |
| Output fuse | 1 A gL/gG |
| pluggable | yes |
| Connection method | Push-in connection |
| Conductor cross section rigid | 0.2 mmΒ² ... 1.5 mmΒ² |
| Conductor cross section flexible | 0.2 mmΒ² ... 1.5 mmΒ² |
| Conductor cross-section AWG | 24 ... 16 |
| Stripping length | 8 mm |
| Status display | 2 x LED (green) |
| Width | 17.5 mm |
| Height | 116.6 mm |
| Depth | 114.5 mm |
| Color (Housing) | yellow (RAL 1018) |
| Housing material | PA |
| Category | 4 (In conjunction with suitable evaluating device) |
| Performance level (PL) | e (In conjunction with suitable evaluating device) |
| Safety Integrity Level (SIL) | 3 (In conjunction with suitable evaluating device) |
| Degree of protection | IP20 |
| Min. degree of protection of inst. location | IP54 |
| Ambient temperature (operation) | -20 Β°C ... 60 Β°C (observe derating) |
| Ambient temperature (storage/transport) | -40 Β°C ... 80 Β°C |
| Maximum altitude | max. 2000 m (Above sea level) |
| Max. permissible humidity (storage/transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Max. permissible relative humidity (operation) | 75 % (on average, 85% infrequently, non-condensing) |
| Shock | 15g (In the event of stress caused by shock, contact reactions are possible for up to 6 ms.) |
| Vibration (operation) | 10 Hz ... 150 Hz, 2g (In the event of stress caused by vibration, contact reactions are possible for up to 1 ms.) |
| Identification | CE-compliant |
| Mounting type | DIN rail mounting |
| Mounting position | vertical or horizontal |
| Rated control circuit supply voltage US | 24 V DC -20 % / +25 % |
| Rated control supply current IS | typ. 80 mA |
| Power consumption at US | typ. 1.92 W |
| Assembly note | See derating curve |
| Maximum inrush current | 500 mA (Ξt = 1 ms at Us) |
| Designation | A1/A2 |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mmΒ² ... 1.5 mmΒ² (only together with CRIMPFOX 6) |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mmΒ² ... 1.5 mmΒ² (only together with CRIMPFOX 6) |
| Voltage | typ. 23 V DC (US - 1 V) |
| Current | max. 100 mA |
| Short-circuit protection | Yes |







