Before procurement teams confirm PHOENIX-CONTACT-PSR-M-EF6-SDOR4-SC, they typically review SMPS Phoenix, Phoenix Contact Relay Socket and Phoenixcontact Phoenix Contact Psr M Em5 1 Ttl2 Pi to double-check performance ratings, stock availability, and supplier credibility carefully.
Phoenix Contact PSR-M-EF6-SDOR4-SC - 1104982 - Safety device
Technical Specifications of Safety device PSR-M-EF6-SDOR4-SC 1104982
| Brand | Phoenix Contact |
| Product Type | Configurable Safety Module |
| Product | PSR-M-EF6-SDOR4-SC |
Phoenix Contact Safety device PSR-M-EF6-SDOR4-SC, 1104982 Technical Specifications
| Specification | Value |
|---|---|
| Note on application | Only for industrial use |
| Product type | Safety device |
| Application | Safe shutdown |
| Safety Integrity Level (SIL) | 1 (1channel wiring) |
| Control | 1 and 2 channel |
| Protection class | III |
| Overvoltage category | II |
| Degree of pollution | 2 |
| Response time | see user manual |
| Restart time | min. 5 s (Boot time) |
| Maximum power dissipation for nominal condition | 7.07 W |
| Nominal operating mode | 100% operating factor |
| Interfaces | DIN rail TBUS for connection to the master module, supplied as standard |
| Rated surge voltage/insulation | Basic insulation 4 kV between all current paths and housing |
| Designation | A1/A2 |
| Rated control circuit supply voltage US | 24 V DC 20 % / +20 % (external fuse, typically 4 A) |
| Rated control supply current IS | typ. 120 mA |
| Power consumption at US | typ. 2.88 W |
| Inrush current | min. 20 mA |
| Filter time | 250 ms ΓΒ±2 ms (Test pulse rate > 500 ms) |
| Protective circuit | Serial protection against polarity reversal |
| Description of the input | IEC 611312 type 3 |
| Number of inputs | 4 |
| Input voltage range "0" signal | 0 V DC ... 5 V DC |
| Input voltage range "1" signal | 11 V DC ... 28.8 V DC |
| Input current range "0" signal | < 1 mA |
| Cable length | max. 100 m (per input) |
| Max. permissible overall conductor resistance | 1.2 kΓΒ© (Input and reset circuit at US) |
| Current consumption | typ. 10 mA (typ. with US) |
| Output description | safetyrelated N/O contacts |
| Number of outputs | 4 (1 NO per output) |
| Limiting continuous current | 4 A (observe derating) |
| Switching frequency | 0.5 Hz |
| pluggable | yes |
| Connection method | Screw connection |
| Conductor cross section rigid | 0.2 mmΓΒ² ... 2.5 mmΓΒ² |
| Conductor cross section flexible | 0.2 mmΓΒ² ... 2.5 mmΓΒ² |
| Conductor cross-section AWG | 24 ... 12 |
| Stripping length | 7 mm |
| Status display | 4 x LED (yellow) |
| Operating voltage display | 1 x LED (green) |
| Error indication | 2 x LED (red) |
| Width | 22.61 mm |
| Height | 112.58 mm |
| Depth | 113.6 mm |
| Color (Housing) | yellow (RAL 1018) |
| Housing material | Polyamide PA nonreinforced |
| Performance level (PL) | e (2channel wiring) |
| Safety Integrity Level (SIL).1 | 3 (2channel wiring) |
| Degree of protection | IP20 |
| Min. degree of protection of inst. location | IP54 |
| Ambient temperature (operation) | 10 ΓΒ°C ... 55 ΓΒ°C (observe derating) |
| Ambient temperature (storage/transport) | 20 ΓΒ°C ... 85 ΓΒ°C |
| Maximum altitude | Γ’ΒΒ€ 2000 m (Above sea level) |
| Max. permissible humidity (storage/transport) | 95 % (noncondensing) |
| Max. permissible relative humidity (operation) | 95 % (noncondensing) |
| Shock | 10g for ΓΒt = 16 ms (continuous shock, 1000 shocks in each space direction) |
| Vibration (operation) | 10 Hz ... 150 Hz, amplitude 0.15 mm, 2g |
| Identification | CEcompliant |
| Mounting type | DIN rail mounting |
| Assembly note | Observe derating |
| Mounting position | vertical or horizontal |
| Screw thread | M3 |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Contact switching type | 4 safe outputs |
| Switching voltage | min. 10 V AC/DC |
| Switching capacity | min. 200 mW |
| Sq. Total current | 64 A2 (for 4x singlechannel, observe derating) |
| Mechanical service life | 40x 106 switching cycles |
| Output fuse | 4 A gL/gG |
