+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8VK-X24024-EIP Power Supply

Omron S8VK-X24024-EIP SMPS is a 240 W switch mode power supply configured to provide 24 VDC with 10 A rated output current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting for structured installation within machine control cabinets. Push-In Plus terminals and terminal blocks provide fixed input and output wiring connections. Typical efficiency is specified at 91% with 115 VAC input and 93% with 230 VAC input. A green LED provides output status indication. The 10 A capacity provides a higher-current 24 VDC configuration than the 120 W models in the same family. Within the S8VK-X Series, the S8VK-X24024-EIP provides a DIN rail 240 W, 24 VDC configuration. Compare other 240W 24V power supplies from Omron industrial automation.

Omron S8VK-X24024-EIP Power Supply
BrandOmron
ProductPower Supply
Model NumberS8VK-X24024-EIP

Omron S8VK-X24024-EIP Power Supply - Technical Specifications

SpecificationValue
Power rating240 W
Output voltage24 VDC
Rated output current10 A
Terminal typePush-in plus Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency91% typ. (at 115 VAC input) 93% typ. (at 230 VAC input)
Rated input voltage100 to 240 VAC
Rated input current2.4 A typ. (at 115 VAC input) 1.2 A typ. (at 230 VAC input)
Input Leakage current0.5 mA max. (at 115 VAC input) 1 mA max. (at 230 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (LED: Green)
Output voltage variable range21.6 to 28 V (With V.ADJ)
Start-up time1000 ms max. (at 115 VAC input) 1000 ms max. (at 230 VAC input)
Hold time35 ms typ. (at 115 VAC input) 35 ms typ. (at 230 VAC input)
Vibration resistance10 to 55 Hz, maximum 5 G, 0.42 mm single amplitude for 2 h each in X, Y, and Z directions
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)?40 to 70°C
Ambient temperature (Storage)?40 to 85°C
Ambient humidity (OperatingStorage)95% max. (Storage humidity: 95% max.)
Cooling fanNo
Degree of protectionIP20 by EN/IEC 60529
Weight700 g max.

The Omron S8VK-X24024-EIP Power Supply provides 240 W rated power with a 24 VDC output and 10 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with Push-In Plus terminals and terminal blocks for structured cabinet installation. Typical efficiency is specified at 91% with 115 VAC input and 93% with 230 VAC input. These characteristics define a higher-current 24 VDC configuration where connected load voltage, total continuous current demand, source compatibility, DIN rail space, and terminal access should be reviewed before installation. Connected equipment should require 24 VDC and keep combined current demand within the rated 10 A output.

Lower-power 24 VDC models can be selected where connected load current does not require the full 10 A capacity. A 120 W configuration provides 5 A while retaining the same nominal output voltage and DIN rail installation format. Comparing equal-voltage models in this way keeps output compatibility constant while wattage and available current change. For a lower-capacity DIN rail model providing 24 VDC at 5 A, compare the Omron S8VK-X12024-EIP.