+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8VK-X48024A-EIP Power Supply

Omron S8VK-X48024A-EIP SMPS is a 480 W switch mode power supply designed to provide 24 VDC with 20 A rated output current. It operates from 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting for structured electrical-panel installation. Push-In Plus terminals and terminal blocks provide fixed wiring connections for input and output circuits. Typical efficiency is specified at 92% with 115 VAC input and 94% with 230 VAC input. A green LED provides output status indication. Its 24 VDC output and 20 A rating define this higher-capacity S8VK-X configuration. Within the S8VK-X Series, the S8VK-X48024A-EIP provides a DIN rail 480 W, 24 VDC configuration. Compare other 480W industrial power supplies from Omron control products.

Omron S8VK-X48024A-EIP Power Supply
BrandOmron
ProductPower Supply
Model NumberS8VK-X48024A-EIP

Omron S8VK-X48024A-EIP Power Supply - Technical Specifications

SpecificationValue
Power rating480 W
Output voltage24 VDC
Rated output current20 A
Terminal typePush-in plus Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency92% typ. (at 115 VAC input) 94% typ. (at 230 VAC input)
Rated input voltage100 to 240 VAC
Rated input current4.6 A typ. (at 115 VAC input) 2.3 A typ. (at 230 VAC input)
Input Leakage current0.5 mA max. (at 115 VAC input) 1 mA max. (at 230 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (LED: Green)
Output voltage variable range21.6 to 28 V (With V.ADJ)
Start-up time1000 ms max. (at 115 VAC input) 1000 ms max. (at 230 VAC input)
Hold time25 ms typ. (at 115 VAC input) 25 ms typ. (at 230 VAC input)
Vibration resistance10 to 55 Hz, maximum 5 G, 0.42 mm single amplitude for 2 h each in X, Y, and Z directions
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)?40 to 70°C
Ambient temperature (Storage)?40 to 85°C
Ambient humidity (OperatingStorage)95% max. (Storage humidity: 95% max.)
Cooling fanNo
Degree of protectionIP20 by EN/IEC 60529
Weight1100 g max.

The Omron S8VK-X48024A-EIP Power Supply provides 480 W rated power with a 24 VDC output and 20 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with Push-In Plus terminals and terminal blocks for structured electrical-panel installation. Typical efficiency is specified at 92% with 115 VAC input and 94% with 230 VAC input. These specifications define a higher-capacity 24 VDC configuration where connected load voltage, continuous current demand, source compatibility, DIN rail space, and terminal access should be reviewed together. Connected equipment should require 24 VDC and remain within the rated 20 A output.

Lower-power 24 VDC models can be compared when the connected load does not require the full 20 A capacity. A 120 W configuration provides 5 A while maintaining the same nominal output voltage and DIN rail mounting format. This makes current requirement and rated power the main electrical differences after output voltage is confirmed. For a lower-capacity 24 VDC model providing 5 A, compare the Omron S8VK-X12024A-EIP.