+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8VS-01524 Power Supply

Omron S8VS-01524 SMPS is a 15 W switch mode power supply designed to deliver 24 VDC with 0.65 A rated output current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting for structured cabinet installation. Screw terminals and terminal blocks provide fixed connections for the AC input and 24 VDC output wiring. Typical efficiency is specified at 83% with 100 VAC input and 80% with 200 VAC input. A green output indicator provides operating status. The 24 VDC output and 0.65 A current rating define this low-current 15 W configuration. Within the S8VS Series, the S8VS-01524 provides a DIN rail 15 W, 24 VDC configuration. Compare other 15W industrial power supplies from Omron industrial controls.

Omron S8VS-01524 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8VS-01524

Omron S8VS-01524 Power Supply - Technical Specifications

SpecificationValue
Power rating15 W
Output voltage24 VDC
Rated output current0.65 A
Terminal typeScrew Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency83% typ. (at 100 VAC input) 80% typ. (at 200 VAC input)
Rated input voltage100 to 240 VAC
Rated input current0.45 A max., 0.34 A typ. (at 100 VAC input) 0.25 A max., 0.22 A typ. (at 200 VAC input)
Input Leakage current0.5 mA max. (at 100 VAC input) 1.0 mA max. (at 200 VAC input)
Input Frequency50/60Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15% With V.ADJ
Start-up time600 ms typ. (at 100 VAC input) 400 ms typ. (at 200 VAC input)
Hold time28 ms typ. (at 100 VAC input) 134 ms typ. (at 200 VAC input)
Vibration resistance10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-10 to 60 ?
Ambient temperature (Storage)-25 to 65 ?
Ambient humidity (OperatingStorage)25 to 85%
Cooling fanNo
Weight160 g max.

The Omron S8VS-01524 Power Supply provides 15 W rated power with a 24 VDC output and 0.65 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for control-panel installation. Typical efficiency is specified at 83% with 100 VAC input and 80% with 200 VAC input. These values define a low-current 24 VDC supply where connected load voltage, total current demand, incoming source, available DIN rail space, and terminal access should be evaluated together. Connected equipment should require 24 VDC and remain within the rated 0.65 A output.

The 24 VDC output allows this model to be compared directly with higher-power S8VS configurations using the same nominal voltage. Increasing power capacity raises available output current, which can be useful when the connected load exceeds 0.65 A. A 30 W configuration provides 1.3 A while retaining DIN rail mounting and the same 24 VDC output. For a higher-capacity 24 VDC model, compare the Omron S8VS-03024.