+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8TS-02505 Power Supply

Omron S8TS-02505 SMPS is a 25 W switch mode power supply designed to provide 5 VDC with 5 A rated output current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting for installation inside electrical control panels. Screw terminals and terminal blocks provide fixed input and output wiring connections. Typical efficiency is specified at 73% with both 100 VAC and 200 VAC input. The 5 VDC output and 5 A capacity distinguish this model from higher-voltage S8TS configurations. Within the S8TS Series, the S8TS-02505 provides a DIN rail 25 W, 5 VDC configuration. Compare other 5V industrial power supplies from Omron control solutions.

Omron S8TS-02505 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8TS-02505

Omron S8TS-02505 Power Supply - Technical Specifications

SpecificationValue
Power rating25 W
Output voltage5 VDC
Rated output current5 A
Terminal typeScrew Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency73% typ. (at 100 VAC input) 73% typ. (at 200 VAC input)
Rated input voltage100 to 240 VAC
Rated input current0.7 A max. (at single operation, 100 VAC input) 0.4 A max. (at single operation, 200 VAC input)
Input Leakage current0.35 mA max. (at 100 VAC input) 0.7 mA max. (at 240 VAC input)
Input Frequency50/60Hz
Output indicatorYes (color: green)
Output voltage variable range±10% (With V.ADJ)
Start-up time1000 ms typ. (at 100 VAC input) 1000 ms typ. (at 200 VAC input)
Hold time20 ms min. (at 100 VAC input) 20 ms min. (at 200 VAC input)
Vibration resistance10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-10 to 50 ?
Ambient temperature (Storage)-25 to 65 ?
Ambient humidity (OperatingStorage)25 to 85%
Cooling fanNo
Weight450 g max.

The Omron S8TS-02505 Power Supply provides 25 W rated power with a 5 VDC output and 5 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for installation and wiring. Typical efficiency is specified at 73% with both 100 VAC and 200 VAC input. These values define a compact 5 VDC supply where connected equipment should require 5 VDC and keep combined current demand within the rated 5 A output. Input-source compatibility, available DIN rail space, and access to the terminals should also be reviewed before installation.

The 100 to 240 VAC input range describes source compatibility independently from the 5 VDC output requirement. Comparing this model with higher-voltage S8TS configurations should focus first on the required load voltage, followed by current and total power. A 12 VDC model may have a lower current rating while serving equipment designed for a different nominal voltage. Such models show the range available within the product family rather than direct substitutions. For a 30 W DIN rail model providing 12 VDC at 2.5 A, compare the Omron S8TS-03012.