+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-G60015C Power Supply

Omron S8FS-G60015C SMPS is a 600 W switch mode power supply designed to provide 15 VDC with a rated output current of 40 A. It accepts 100 to 240 VAC input at 50/60 Hz and uses direct mounting with screw terminals for fixed electrical-panel installation. Typical efficiency is specified at 84% with 100 VAC input and 88% with both 200 VAC and 230 VAC input. The 15 VDC output and 40 A current rating define this model as a higher-capacity configuration for compatible loads in this voltage class. Within the S8FS-G Series, the S8FS-G60015C provides a direct-mount 600 W, 15 VDC configuration. Compare other 600W industrial power supplies from Omron automation.

Omron S8FS-G60015C Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-G60015C

Omron S8FS-G60015C Power Supply - Technical Specifications

SpecificationValue
Power rating600 W
Output voltage15 VDC
Rated output current40 A
Terminal typeScrew Terminal
Mounting methodDirect Mounting
ConnectionTerminal blocks
Efficiency84 % typ.(at 100 VAC input) 88 % typ.(at 200 VAC input) 88 % typ.(at 230 VAC input)
Rated input voltage100 to 240 VAC
Rated input current7.7 A typ.(at 100 VAC input) 3.8 A typ.(at 200 VAC input)
Input Leakage current0.5 mA max.(at 100 VAC input) 1 mA max.(at 200 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15 % (With V.ADJ)
Start-up time1000 ms max.(at 100 VAC input) 1000 ms max.(at 200 VAC input)
Hold time25 ms typ.(at 100 VAC input) 25 ms typ.(at 200 VAC input)
Vibration resistance10 to 55 Hz, 4.5 G max., 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-20 to 70 ?
Ambient temperature (Storage)-25 to 75 ?
Ambient humidity (OperatingStorage)90 %RH max.
Cooling fanYes
Weight1050 g max.

The Omron S8FS-G60015C Power Supply provides 600 W rated power with a 15 VDC output and 40 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses direct mounting with screw terminals and terminal blocks for fixed panel installation. Typical efficiency is specified at 84% with 100 VAC input and 88% with both 200 VAC and 230 VAC input. These specifications define a high-current 15 VDC configuration where nominal load voltage should be confirmed before available current, incoming source, or physical mounting is evaluated. Connected equipment should specifically require 15 VDC and keep its combined current demand within the stated 40 A output capacity. Direct mounting requires sufficient fixed panel surface for the supply.

Screw terminals provide defined connection points for the incoming AC source and outgoing DC load circuits. The 100 to 240 VAC input range should be checked independently from the 15 VDC output requirement because source and load voltages describe different sides of the conversion. Comparing another 15 VDC model gives clearer capacity context by retaining the same load voltage while wattage and current differ. For a lower-capacity 100 W DIN rail configuration delivering 15 VDC at 7 A, compare the Omron S8FS-G10015CD.