+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-C15048J Power Supply

Omron S8FS-C15048J SMPS is a 150 W switch mode power supply configured to provide 48 VDC with a rated output current of 3.3 A. It uses single-phase input, DIN rail mounting, and screw terminals for industrial electrical-panel installation. Efficiency is specified at 87% typical with 115 VAC input and 88% typical with 230 VAC input. Supported input ranges are 90 to 132 VAC, 180 to 264 VAC, and 254 to 373 VDC at 50/60 Hz. Within the S8FS-C Series, the S8FS-C15048J provides a DIN rail 150 W, 48 VDC configuration. Compare other 48V industrial power supplies from Omron control systems.

Omron S8FS-C15048J Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-C15048J

Omron S8FS-C15048J Power Supply - Technical Specifications

SpecificationValue
Power rating150 W
Output voltage48 VDC
Rated output current3.3 A
Terminal typeScrew Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency87 % typ.(at 115 VAC input) 88 % typ.(at 230 VAC input)
Rated input voltageSingle phase 90 to 132 VAC , Single phase 180 to 264 VAC , 254 to 373 VDC
Rated input current2.8 A typ.(at 115 VAC input) 1.6 A typ.(at 230 VAC input)
Input Leakage current0.50 A typ.(at 115 VAC input) 0.70 A typ.(at 230 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (color: green)
Output voltage variable range-10% to 10% (with V. ADJ)
Start-up time760 ms max.(at 115 VAC input) 750 ms max.(at 230 VAC input)
Hold time21 ms max.(at 115 VAC input) 27 ms max.(at 230 VAC input)
Vibration resistance10 to 55 Hz, 0.375-mm half amplitude for 2 h each in X, Y, and Z directions 10 to 500 Hz, 0.26-mm half amplitude for 1 h each in X, Y, and Z directions
Shock resistance150 m/s2, 3 times each in ±X, ±Y, ±Z directions
Ambient temperature (Operating)-20 to 60°C
Ambient temperature (Storage)-40 to 85°C
Ambient humidity (OperatingStorage)20% to 90% (Storage humidity: 10% to 95%)
Cooling fanNo
Weight500 g max.

The Omron S8FS-C15048J Power Supply provides 150 W rated power with a 48 VDC output and 3.3 A rated current. It uses single-phase input, DIN rail mounting, screw terminals, and terminal blocks for electrical-panel installation. Efficiency is 87% typical at 115 VAC input and 88% typical at 230 VAC input. Supported incoming ranges are 90 to 132 VAC, 180 to 264 VAC, and 254 to 373 VDC at 50/60 Hz. A green output indicator provides status visibility, while V.ADJ allows -10% to 10% adjustment around nominal output. The unit operates from -20 to 60°C without a fan and weighs up to 500 g. These specifications place the model within the higher-voltage 48 VDC class.

The connected equipment should require 48 VDC and remain within the 3.3 A current rating. DIN rail availability and conductor access should be checked as physical requirements, while input compatibility must be verified against the available source. Output voltage should remain the primary comparison factor because wattage alone does not establish electrical compatibility. For comparison with a lower-power DIN rail supply that provides 24 VDC at 1.1 A from a 25 W rating, see the Omron S8FS-C02524D.