The Omron S8FS-C20005J Power Supply provides a high-current 5 VDC output rated at 40 A with a total power rating of 200 W. This combination is intended for compatible low-voltage industrial equipment that requires considerably more current than lower-capacity S8FS-C variants. The supply converts incoming electrical power into the 5 VDC source required by connected control, interface, or electronic loads within an automation system. DIN rail mounting supports structured placement in the control enclosure, while screw terminals provide secure points for power wiring. Its 50/60 Hz frequency specification supports integration with industrial electrical installations. The S8FS-C20005J expands the S8FS-C power supply series into higher-current applications and can be compared with other 200W 5V power supplies from Omron automation solutions.
Single phase 90 to 132 VAC , Single phase 180 to 264 VAC , 254 to 373 VDC
Rated input current
4 A typ.(at 115 VAC input)
2.3 A typ.(at 230 VAC input)
Input Leakage current
0.35 A typ.(at 115 VAC input)
0.60 A typ.(at 230 VAC input)
Input Frequency
50/60 Hz
Output indicator
Yes (color: green)
Output voltage variable range
-10% to 10% (with V. ADJ)
Start-up time
620 ms max.(at 115 VAC input) 600 ms max.(at 230 VAC input)
Hold time
32 ms max.(at 115 VAC input) 37 ms max.(at 230 VAC input)
Vibration resistance
10 to 55 Hz, 0.375-mm half amplitude for 2 h each in X, Y, and Z
directions
10 to 500 Hz, 0.26-mm half amplitude for 1 h each in X, Y, and Z
directions
Shock resistance
150 m/s2, 3 times each in ±X, ±Y, ±Z directions
Ambient temperature (Operating)
-20 to 50°C
Ambient temperature (Storage)
-40 to 85°C
Ambient humidity (OperatingStorage)
20% to 90% (Storage humidity: 10% to 95%)
Cooling fan
No
Weight
700 g max.
The Omron S8FS-C20005J is frequently assessed alongside related units in the Omron Switch Mode Power Supply range, as these SMPS models share comparable wiring behaviour, thermal characteristics, load endurance, and panel integration features. Engineers often evaluate related models such as Omron S8FS-C35005 (350 W, 5 VDC, 60 A, DIN rail) when configuring power rails for PLC racks, servo drives, motion assemblies, and distributed I/O terminals. Comparing specifications like power rating, output voltage behaviour, continuous output current, and mounting orientation helps maintain predictable voltage delivery across machinery with dynamic load patterns. The S8FS-C20005J fits smoothly into conveyors, dosing modules, electrical frames, and compact control panels where a dependable Omron SMPS Power Supply is required. These related SMPS variants also support unified wiring layouts, easier spare handling, and consistent power distribution across multi-panel automation systems.
