+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-C15036 Power Supply

Omron S8FS-C15036 SMPS is a 150 W switch mode power supply configured to deliver 36 VDC with a rated output current of 4.3 A. It uses single-phase input, DIN rail mounting, and screw terminals for industrial control-panel installation. Efficiency is specified at 86% typical with 115 VAC input and 87% typical with 230 VAC input. Supported input ranges include 90 to 132 VAC, 180 to 264 VAC, and 254 to 373 VDC at 50/60 Hz. Within the S8FS-C Series, the S8FS-C15036 provides a DIN rail 150 W, 36 VDC configuration. Compare other 36V switch mode power supplies from Omron industrial products.

Omron S8FS-C15036 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-C15036

Omron S8FS-C15036 Power Supply - Technical Specifications

SpecificationValue
Power rating150 W
Output voltage36 VDC
Rated output current4.3 A
Terminal typeScrew Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency86 % typ.(at 115 VAC input) 87 % typ.(at 230 VAC input)
Rated input voltageSingle phase 90 to 132 VAC , Single phase 180 to 264 VAC , 254 to 373 VDC
Rated input current2.8 A typ.(at 115 VAC input) 1.6 A typ.(at 230 VAC input)
Input Leakage current0.40 A typ.(at 115 VAC input) 0.60 A typ.(at 230 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (color: green)
Output voltage variable range-10% to 10% (with V. ADJ)
Start-up time730 ms max.(at 115 VAC input) 720 ms max.(at 230 VAC input)
Hold time23 ms max.(at 115 VAC input) 29 ms max.(at 230 VAC input)
Vibration resistance10 to 55 Hz, 0.375-mm half amplitude for 2 h each in X, Y, and Z directions 10 to 500 Hz, 0.26-mm half amplitude for 1 h each in X, Y, and Z directions
Shock resistance150 m/s2, 3 times each in ±X, ±Y, ±Z directions
Ambient temperature (Operating)-20 to 60°C
Ambient temperature (Storage)-40 to 85°C
Ambient humidity (OperatingStorage)20% to 90% (Storage humidity: 10% to 95%)
Cooling fanNo
Weight500 g max.

The Omron S8FS-C15036 Power Supply provides 150 W rated power with a 36 VDC output and 4.3 A rated current. It uses single-phase input, DIN rail mounting, screw terminals, and terminal blocks for industrial panel installation. Efficiency is 86% typical at 115 VAC input and 87% typical at 230 VAC input. Supported supply ranges include 90 to 132 VAC, 180 to 264 VAC, and 254 to 373 VDC at 50/60 Hz. A green output indicator shows operating status, while V.ADJ permits output adjustment from -10% to 10%. The fanless unit operates from -20 to 60°C and weighs up to 500 g. These values identify the model primarily by its 36 VDC electrical class and 4.3 A output capacity.

The connected equipment must specifically require 36 VDC and remain within the rated current. DIN rail space, terminal access, input range, and ambient temperature are additional conditions that should be verified during selection. Similar wattage does not make supplies with different output voltages interchangeable because the required load voltage remains the first electrical relationship. For comparison with another 150 W configuration that shifts the output to 48 VDC and current to 3.3 A, see the Omron S8FS-G15048C.