+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron E3X-SD51 2M Fiber Optic Sensor

Omron E3X-SD51 2M is a PNP fiber amplifier designed for fast optical sensing using compatible fiber optic sensor heads. Its red 4-element LED operates at 625 nm, while the PNP output provides a switching signal for compatible control inputs. An operate or reset response of up to 200 μs supports high-speed detection. The amplifier uses a pre-wired 2 m cable and operates from 12 to 24 VDC ±10%, providing a straightforward connection for sensing systems. IP50 protection defines the supplied enclosure rating. The E3X-SD51 2M belongs to the E3X-SD Series within the fiber amplifier range from Omron sensing products, combining PNP switching, red LED sensing and fast signal response in a pre-wired amplifier configuration.

Omron E3X-SD51 2M Fiber Optic Sensor
BrandOmron
ProductFiber Amplifier Unit
Model NumberE3X-SD51 2M

Omron E3X-SD51 2M Fiber Optic Sensor - Technical Specifications

SpecificationValue
Connection MethodPre-wired Pre-wired Cable
Cable Length2 m
OutputPNP
Light SourceRed, 4-element LED (625 nm)
Power Supply Voltage12 to 24 VDC ±10%, ripple (p-p): 10% max
Response TimeOperate or reset: 200 μs max.
MaterialsCase: Polybutylene terephthalate (PBT) Cover: Polycarbonate (PC)
Degree Of Protection IpIEC 60529 IP50
Ambient Illumination Receiver SideReceiver side Incandescent lamp: 10,000 lux max. Sunlight: 20,000 lux max.
Ambient Temperature RangeOperating: Groups of 1 to 3 Amplifiers: −25°C to 55°C Groups of 4 to 11 Amplifiers: −25°C to 50°C Groups of 12 to 16 Amplifiers: −25°C to 45°C Storage: −30°C to 70°C (with no icing or condensation)
Ambient Humidity RangeOperating and storage: 35% to 85% (with no condensation)
Insulation Resistance20 MΩ. min. (at 500 VDC)
Dielectric Strength1,000 VAC at 50/60 Hz for 1 minute
Vibration Resistance Destruction10 to 55 Hz with a 1.5-mm double amplitude for 2 hours each in X, Y and Z directions
Shock Resistance Destruction500 m/s2, for 3 times each in X, Y and Z directions

The Omron E3X-SD51 2M Fiber Amplifier provides a PNP switching output and uses a red 4-element LED operating at 625 nm for optical sensing with compatible fiber heads. Its operate or reset response is specified at 200 μs maximum, making response speed an important characteristic for model selection. The amplifier uses a pre-wired 2 m cable for electrical connection and operates from 12 to 24 VDC ±10%. Its enclosure carries an IEC 60529 IP50 protection rating. The receiver side supports ambient illumination up to 10,000 lux from an incandescent lamp and 20,000 lux from sunlight, defining the supplied light-resistance characteristics. PNP output, 625 nm red LED sensing, 200 μs response, pre-wired connection and 12 to 24 VDC operation are the primary attributes defining E3X-SD51 within the E3X-SD amplifier range. These characteristics provide the useful context for selecting the model without relying on weight or secondary test specifications. For another supplied pre-wired PNP fiber amplifier using a 625 nm red LED but offering digital tuning and a different amplifier architecture, the E3X-HD41 2M provides a relevant related model for comparing PNP fiber amplifier configurations.