Omron E3X-SD21 2M Fiber Optic Sensor
Omron E3X-SD21 2M is an NPN fiber amplifier designed for fast optical detection using a pre-wired 2 m cable. Its red 4-element LED operates at 625 nm, while an operate or reset response of up to 200 μs supports rapid sensing signals. The amplifier operates from 12 to 24 VDC ±10% and provides an NPN switching output for compatible control inputs. Its PBT case and polycarbonate cover provide IEC 60529 IP50 protection. The receiver side supports sunlight levels up to 20,000 lx, defining its specified ambient-light capability. The E3X-SD21 2M belongs to the E3X-SD Series within the fiber amplifier range from Omron sensing products, combining NPN output, fast response and a pre-wired amplifier connection.

| Brand | Omron |
| Product | Fiber Amplifier Unit |
| Model Number | E3X-SD21 2M |
Omron E3X-SD21 2M Fiber Optic Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Connection Method | Pre-wired Cable |
| Cable Length | 2 m |
| Output | NPN |
| Light Source | Red, 4-element LED (625 nm) |
| Power Supply Voltage | 12 to 24 VDC ±10%, ripple (p-p): 10% max |
| Response Time | Operate or reset: 200 μs max. |
| Materials | Case: Polybutylene terephthalate (PBT) Cover: Polycarbonate (PC) |
| Degree Of Protection Ip | IEC 60529 IP50 |
| Ambient Illumination Receiver Side | Receiver side Incandescent lamp: 10,000 lux max. Sunlight: 20,000 lux max. |
| Ambient Temperature Range | Operating: Groups of 1 to 3 Amplifiers: −25°C to 55°C Groups of 4 to 11 Amplifiers: −25°C to 50°C Groups of 12 to 16 Amplifiers: −25°C to 45°C Storage: −30°C to 70°C (with no icing or condensation) |
| Ambient Humidity Range | Operating and storage: 35% to 85% (with no condensation) |
| Insulation Resistance | 20 MΩ. min. (at 500 VDC) |
| Dielectric Strength | 1,000 VAC at 50/60 Hz for 1 minute |
| Vibration Resistance Destruction | 10 to 55 Hz with a 1.5-mm double amplitude for 2 hours each in X, Y and Z directions |
| Shock Resistance Destruction | 500 m/s2, for 3 times each in X, Y and Z directions |
The Omron E3X-SD21 2M Fiber Amplifier provides an NPN switching output and uses a red 4-element LED operating at 625 nm for optical sensing. Its pre-wired 2 m cable provides a direct electrical connection, while operation from 12 to 24 VDC ±10% supports standard DC control power. An operate or reset response of 200 μs maximum makes response speed one of the important characteristics of this amplifier. The receiver side supports ambient illumination up to 10,000 lux from an incandescent lamp and 20,000 lux from sunlight. Its PBT case and polycarbonate cover provide IEC 60529 IP50 protection. Operating temperature varies according to the number of amplifiers installed together, with groups of 1 to 3 amplifiers specified from -25 to 55°C. NPN output, 625 nm red LED sensing, pre-wired connection and 200 μs response are the main characteristics defining E3X-SD21. These attributes make the electrical output, optical source and response characteristics clear when selecting a fiber amplifier. For a related NPN fiber amplifier using a wire-saving connector rather than a pre-wired cable, the E3X-HD6 provides another Omron amplifier configuration for comparing connection method and optical sensing architecture.
