+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron E3X-ZV11 2M Fiber Optic Sensor

Omron E3X-ZV11 2M is an NPN fiber amplifier designed for object detection using a red LED operating at 625 nm. Selectable Dark-ON and Light-ON modes provide flexible switching logic, while a fast 0.05 ms response supports rapid optical signal processing. The amplifier provides 1 sensing channel and 1 NPN output, making it a straightforward single-channel sensing configuration. A timer provides additional output timing control, while the pre-wired 2 m cable supports direct electrical connection. The unit operates from 12 to 24 VDC and uses a polycarbonate enclosure with IP50 protection. The E3X-ZV11 2M belongs to the E3X-ZV Series within the fiber amplifier range from Omron sensing products, combining NPN output, red-light sensing and single-channel object detection.

Omron E3X-ZV11 2M Fiber Optic Sensor
BrandOmron
ProductFiber Amplifier Unit
Model NumberE3X-ZV11 2M

Omron E3X-ZV11 2M Fiber Optic Sensor - Technical Specifications

SpecificationValue
ShapeCuboid, rail mounting
Connection MethodPre Wired Cable, 2M Length
Sensing MethodFiber amplifier
ApplicationObject detection
OutputNPN
Light SourceRed LED (625 nm)
Operation ModeDark-ON, Light-ON
Power Supply Voltage12-24 VDC
FunctionTimer
Response Time0.05 ms
Material HousingPolycarbonate
Number Of Channels1
Number Of Digital Outputs1
Degree Of Protection IpIP50
WeightApprox. 115 g/ approx. 75 g

The Omron E3X-ZV11 2M Fiber Amplifier provides an NPN switching output for object detection and uses a red LED operating at 625 nm as its optical source. Selectable Dark-ON and Light-ON modes allow the output logic to match different sensing conditions. A fast 0.05 ms response supports rapid optical signal processing, while the amplifier provides 1 sensing channel and 1 output. A timer provides additional output timing control without adding unnecessary complexity to the single-channel configuration. The pre-wired 2 m cable provides direct electrical connection, and the unit operates from 12 to 24 VDC. Its polycarbonate enclosure provides IP50 protection. NPN output, 625 nm red LED sensing, single-channel operation, 0.05 ms response and pre-wired connection are the primary characteristics defining E3X-ZV11. These specifications distinguish the model from dual-channel MZV configurations and from amplifier families using bank or external-input functions. The straightforward sensing architecture keeps the focus on optical object detection and switching. For another pre-wired NPN Omron fiber amplifier designed for object detection with a 625 nm red optical source, the E3X-HD11 2M provides a related model for comparing amplifier architecture and response characteristics.