Omron E2E-X5E2-M1: NPN NC Proximity Sensor in Chennai
The technical specifications for the Omron NPN NC Proximity Sensor E2E-X5E2-M1:
- Sensor Head Diameter: M18
- Installation: Flush (Shielded)
- Sensing Distance: 5 mm
- Connection Method: M12 Connector Models
- Switching: Normally Closed (NC)
- Output Configuration: NPN, DC 3 Wire
- Response Frequency: 0.6 KHz
- Power Supply Voltage: 12 to 24 VDC
Omron NPN NC Proximity Sensor E2E-X5E2-M1 Technical Specification:
Sensor Head (Dia) | M18 |
Installation | Flush | Shielded |
Sensing Distance | 5 mm |
Connection Method | M12 Connector Models |
Switching | NC |
Output Configuration | NPN, DC 3 Wire |
Differential travel | 10% max. of sensing distance |
Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
Standard sensing object | Iron, 18 × 18 × 1 mm |
Response frequency | 0.6 KHz |
Power supply voltage | 12 to 24 VDC ripple (p-p) 10% max. |
Leakage current | 13 mA max |
Indicator | Operation indicator (red) |
Protection circuit | Load short-circuit protection, Surge suppressor, Reverse polarity protection |
Ambient air temperature | Operating Storage: −40 to 85°C (with no icing or condensation) |
Ambient humidity | Operating/storage: 35% to 95% (with no condensation) |
Voltage influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range |
Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant |
Material Case | Stainless steel (SUS303) |
Material Sensing surface | PBT |
Looking for the Omron E2E-X5E2-M1 Proximity Sensors in Chennai? You’re in the right place. This sensor has an M18 head, flush shielded installation, 5 mm sensing distance, M12 connector models, NPN NC Proximity Sensor, DC 3 wire output, 0.6 kHz response frequency, and operates on 12-24 VDC power. It has a max 10% differential travel, detects ferrous metal, and features a red operation indicator. Find the best prices for this sensor at IndMALL Automation.