E2E-X3D1-M1G: Omron M12 Diameter Proximity Sensor in Chennai
Omron M12 Diameter Proximity Sensor E2E-X3D1-M1G Technical Specification:
Sensor Head (Dia) | M12 |
Installation | Flush | Shielded |
Sensing Distance | 3 mm |
Connection Method | M12 Connector Models |
Switching | NO |
Output Configuration | DC 2 Wire (No Self-diagnostic Output) |
Differential travel | 15% max. of sensing distance |
Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
Standard sensing object | Iron, 12 × 12 × 1 mm |
Response frequency | 1 kHz |
Power supply voltage | 12 to 24 VDC, ripple (p-p): 10% max. (10 to 30 VDC) |
Leakage current | 0.8 mA max |
Indicator | Operation indicator (red) and setting indicator (green) |
Protection circuit | Surge suppressor, Load short-circuit protection (for control and diagnostic output) |
Ambient air temperature | Operating: −25 to 70°C, Storage: −40 to 85°C (with no icing or condensation) |
Ambient humidity | Operating/storage: 35% to 95% (with no condensation) |
Voltage influence | ±1% max. of sensing distance at a rated voltage in the rated voltage ±15% range |
Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant |
Material Case | Stainless steel (SUS303) |
Material Sensing surface | PBT |
If you’re concerned about the prices of Omron M12 Diameter Proximity Sensor E2E-X3D1 M1G, be assured of getting the best rates in Chennai. This Inductive Sensor is M12 size, shielded, with a 3 mm sensing distance, M12 connectors, DC 2 Wire, Ferrous metal object, and NO switching. Find the best prices for these at IndMALL Automation.