Omron E2E-X8MD1-M1G Proximity Sensor
Omron E2E-X8MD1-M1G provides an 8 mm sensing range from an M12 unshielded long-body design intended for greater detection clearance. Its 0 to 6.4 mm setting distance is paired with DC 2-wire NO switching, an M12 connector, and a 12 to 24 VDC supply. Ferrous metal is the specified target, with an iron 30 × 30 × 1 mm standard sensing object. Response frequency reaches 0.8 kHz, and the control current range is 3 to 100 mA. An orange operation indicator is provided together with surge suppression and load short-circuit protection. The E2E-X8MD1-M1G is listed among M12 DC 2-wire proximity sensors from Omron sensing and control products.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | E2E-X8MD1-M1G |
Omron E2E-X8MD1-M1G Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Inductive |
| Size | M12 |
| Mounting type | Unshielded |
| Sensing Distance | 8 mm |
| Setting Distance | 0 to 6.4 mm |
| Output configuration | DC 2-wire |
| Operation Mode | NO |
| Body Length | Long Body |
| Connection Method | M12 Connector |
| Detectable Object | Ferrous metal |
| Standard Sensing Object | Iron, 30 × 30 × 1 mm |
| Response Frequency | 0.8 kHz |
| Power Supply Voltage | 12 to 24 VDC |
| Protection Circuit | Surge suppressor, Load short-circuit protection |
| Ambient Temperature Range | Operating: -25 to 70°C, Storage: -40 to 85°C (with no icing or condensation) |
| Degree of Protection | IP67 (IEC 60529), IP67G |
| Control Output | 3 to 100 mA Polarity: 3 V max. No polarity: 5 V max. |
| Indicators | Operation indicator (orange) |
| Materials | Nickel-plated brass, Polybutylene terephthalat (PBT), Nickel-plated brass, Zinc-plated iron, Vinyl chloride (PVC). |
| Weight | Approx. 55 g |
The Omron E2E-X8MD1-M1G Proximity Sensor is built around an M12 unshielded long-body sensing format that provides an 8 mm detection distance and a 0 to 6.4 mm setting range. It uses DC 2-wire NO switching through an M12 connector and works from a 12 to 24 VDC supply. Ferrous metal is the specified target, with an iron 30 × 30 × 1 mm standard sensing object. Response frequency is 0.8 kHz. Control current is rated from 3 to 100 mA, while an orange operation indicator provides switching status. Surge suppression and load short-circuit protection are specified for the output circuit.
Operating conditions for the E2E-X8MD1-M1G range from -25 to 70°C, while storage extends from -40 to 85°C without icing or condensation. IP67 according to IEC 60529 and IP67G are specified. The unshielded arrangement provides greater sensing clearance, while the long threaded body offers additional adjustment during installation. Its M12 connector allows detachable field cabling, and the two-wire architecture reduces conductor requirements for compatible control circuits. Nickel-plated brass, PBT, zinc-plated iron, and PVC are listed among the construction materials. For an E2E alternative using 3 mm sensing and NPN switching with Smartclick connection, see E2E-X3C1L8-M1TJ 0.3M.
