Omron E2E-X10D1S 2M Proximity Sensor
Omron E2E-X10D1S 2M is a cylindrical M30 shielded inductive proximity sensor with a 10 mm sensing distance and 0 to 8 mm setting distance. It provides DC 2-wire NO switching through an oil-resistant PVC pre-wired 2 m cable and operates from 12 to 24 VDC. Ferrous metal is the specified detectable object, with an iron 30 × 30 × 1 mm standard sensing object. Response frequency is 0.4 kHz, while control output is rated from 3 to 100 mA with a 50 mA diagnostic output. The E2E-X10D1S 2M is included among M30 shielded proximity sensors from Omron industrial sensing products.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | E2E-X10D1S 2M |
Omron E2E-X10D1S 2M Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Inductive |
| Housing Shape | Cylindrical |
| Size | M30 |
| Mounting type | Shielded |
| Sensing Distance | 10 mm |
| Setting Distance | 0 to 8 mm |
| Output configuration | DC 2-Wire |
| Operation Mode | NO |
| Connection Method | Pre-wired 2 M Cable |
| Cable specifications | PVC (Oil-resistant) |
| Detectable Object | Ferrous metal |
| Standard Sensing Object | Iron, 30 × 30 × 1 mm |
| Response Frequency | 0.4 kHz |
| Power Supply Voltage | 12 to 24 VDC |
| Protection Circuit | Surge suppressor, Load short-circuit protection (for control and diagnostic output) |
| Ambient Temperature Range | Operating: −25 to 70°C, Storage: −40 to 85°C (with no icing or condensation) |
| Degree of Protection | IEC 60529 IP67, in-house standards: oil-resistant |
| Control Output | 3 to 100 mA, Diagnostic output: 50 mA for -D1(5)S 3 V max. |
| Indicators | Operation indicator (red) and setting indicator (green) |
| Materials | Nickel-plated brass, Polybutylene terephthalat (PBT), Nickel-plated brass, Zinc-plated iron, Vinyl chloride (PVC). |
| Weight | Approx. 175 g |
The Omron E2E-X10D1S 2M Proximity Sensor uses a cylindrical M30 shielded inductive sensing body with a 10 mm sensing distance and a 0 to 8 mm setting distance. It provides DC 2-wire NO switching through an oil-resistant PVC pre-wired 2 m cable and operates from 12 to 24 VDC. Ferrous metal is the specified detectable object, with an iron 30 × 30 × 1 mm standard sensing object. Response frequency is 0.4 kHz. Control output is rated from 3 to 100 mA, while diagnostic output is rated 50 mA. Red and green LEDs indicate operation and setting status, while surge suppression and load short-circuit protection are specified.
Operating conditions for the E2E-X10D1S extend from -25 to 70°C, while storage covers -40 to 85°C without icing or condensation. IEC 60529 IP67 and an in-house oil-resistant rating are listed. Nickel-plated brass, PBT, zinc-plated iron, and PVC are specified among the construction materials. The shielded M30 configuration pairs a 10 mm sensing range with DC 2-wire NO operation and direct oil-resistant cable wiring. Ferrous metal remains the specified detection target, and the 0 to 8 mm setting range supports sensor positioning within the stated sensing distance. For another E2E sensor with an M18 body, 14 mm sensing range, and NPN NC output, see E2E-X14C218-M1.
