E2B-M18LS08-WP-B1 2M: Omron Proximity Sensor PNP NO

Name: E2B-M18LS08-WP-B1 2M | Omron Proximity Sensor PNP NO
Brand: Omron
SKU: E2B-M18LS08-WP-B1 2M
Availability: InStock
Rating: 4.9 (23 reviews)

Datasheet

The technical specifications for the Omron Proximity Sensor PNP NO E2B-M18LS08-WP-B1 2M are as follows:

Sensor Head diameter: M18
Mounting : Flush | Shielded
Sensing Distance: 8mm
Body Length: Long Body (78mm)
Output Configuration: PNP
Operation Mode: NO
Connection: Pre-Wired 2M Length
Power Supply Voltage: 10 to 30 VDC

Omron Proximity Sensor PNP NO E2B-M18LS08-WP-B1 2M Technical Specifications:

Sensor Head (Dia)	M18 (18mm)
Installation	Flush \| shielded
Sensing Distance	8mm
Body Length	Long (78mm)
Output Configuration	PNP
Switching	NO
Connection	Pre-Wired, 2M Length
Differential travel	10% max. of sensing distance
Detectable object	Ferrous metal (The sensing distance decreases with non-ferrous metal.)
Standard sensing object	24 × 24 × 1 mm
Response frequency	500 Hz
Power supply voltage	10 to 30 VDC. (including 10% ripple (p-p))
Current consumption	10 mA max
Indicator	Operation indicator (Yellow LED)
Protection circuit	Output reverse polarity protection, Power source circuit reverse polarity protection, Surge suppressor, Short-circuit protection
Ambient air temperature	Operation and storage: -25 to 70ºC
Ambient humidity	Operation and Storage: 35 to 95%
Voltage influence	±1% max. of sensing distance in 24 V ±15%
Standard and listings	(1) IP67 (IEC60529) (2) EMC (EN60947-5-2)
Material Case	Brass-nickel plated
Material Sensing surface	PBT
Material Cable	The standard cable is 4 mm dia. PVC
Material Clamping nut	Brass-nickel plated

People Also Ask

What type of PNP is a proximity switch?

PNP proximity sensors, often referred to as “sourcing” sensors, provide a positive output. When a target object is detected within its sensing range, the sensor’s output switches to allow current to flow from the positive supply (usually +24V) to the load, which is typically connected to an input on a PLC (Programmable Logic Controller).

The PLC input interprets this +24V signal as a logic HIGH state. PNP sensors are widely used in industrial automation systems where the control logic requires a positive signal to indicate the presence of an object.

What is PNP in sensor?

PNP is a term used to describe a type of sensor output that sources a positive voltage, commonly referred to as “sourcing.” In an IO Module, a PNP input typically defaults to a high state, such as +5V, when it is not activated.

The distinction between NPN and PNP is often relevant to digital signals. Devices like sensors can come with either NPN or PNP outputs.

What is PNP normally open?

In a PNP transistor configuration for sensors, “NO” stands for “Normally Open,” indicating that the output does not carry voltage when the sensor is in a non-actuated state.

When referring to the sensor’s output connector, which is often labeled as number 4, it means that this pin will not have voltage present until the sensor is triggered by the presence of an object within its sensing range. Once actuated, the PNP sensor sources voltage to the output, completing the circuit.

What is the current flow of PNP?

In a PNP transistor, the current travels from the emitter to the collector. The PNP transistor’s letter designates the voltage needed by the emitter, collector, and base of the transistor.

The base of a PNP transistor has always been negative in relation to the emitter and collector.

Is PNP digital or analog?

NPN and PNP designations are typically associated with the digital signaling of sensors. These devices can feature either configuration. For successful sensor integration, it’s essential to align the sensor’s signal type with that of the receiving device’s input requirements.

The Omron E2B-M18LS08-WP-B1 2M Proximity Sensor is an M18 diameter, flush-mounted, shielded with an 8mm sensing distance. It output configuration is PNP NO, 78mm long, and comes pre-wired with a 2-meter cable length.

IndMALL offers the Omron Proximity Sensor PNP NO at competitive prices with ready stock. We provides the Omron E2B-M18LS08-WP-B1, along with a comprehensive range of other inductive proximity sensors from Omron and various brands.