Leuze IGSU14E/1WT.3-M12V
Leuze IGSU14E/1WT.3-M12V Technical Features
The Leuze IGSU14E/1WT.3-M12V is an ultrasonic fork sensor with part number 50142873. It belongs to the GS 14 series and has a label identification fork type. The label width is 4mm and the label gap of 2mm. It uses an M12 connector and requires a supply voltage of 18 to 30 VDC.
| Series | 14 |
| Principle of Physics | ultrasonics |
| Application | Detection of non-transparent labels Detection of transparent labels |
| Label width, min. | 4 mm |
| Label gap, min. | 2 mm |
| Medium | Transparent and not transparent |
| Special version | ALC function (tracking) Manual fine-tuning of the switching threshold Teach input Warning output easyTeach function |
| Supply voltage UB | 18 … 30 V, DC |
| Open-circuit current | 0 … 60 mA, Typical value |
| Number of teach inputs | 1 Piece(s) |
| Type | Teach input |
| Voltage type | DC |
| Switching voltage | high: ≥9V low: ≤ 2 V |
| Input resistance | 15,000 Ω |
| Active switching state | High |
| Number of digital switching outputs | 2 Piece(s) |
| Type | Digital switching output |
| Voltage type | DC |
| Switching current, max. | 100 mA |
| Switching voltage | high: ≥(UB-2V) low: ≤ 2 V |
| Load capacity | 0.01 µF |
| Switching element | Transistor, Push-pull |
| Switching(Output 1) principle | IO-Link / NPN light switching (switching in the gap), PNP dark switching (switching on the label) |
| Switching(Output 2) principle | active low (normal operation high, event case low) |
| Switching frequency | 2,000 Hz |
| Response time | 0.2 ms |
| Readiness delay | 300 ms |
| Max. Bandgeschwindigkeit beim Teach-In | 50 m/min |
| Type | IO-Link |
| COM mode | COM3 |
| Profile | Smart sensor profile |
| Min. cycle time | COM3 = 0.5 ms |
| Frame type | 2.5 |
| Specification | V1.1 |
| Device ID | 2521 |
| SIO-mode support | Yes |
| Number of connections | 1 Piece(s) |
| Function | Signal IN Signal OUT Voltage supply |
| Type of connection | Connector |
| Thread size | M12 |
| Type | Male |
| Material | Metal |
| No. of pins | 5 -pin |
| Encoding | A-coded |
| Plug outlet | Vertical (perpendicular to belt movement) |
| Design | Fork |
| Mouth width | 4 mm |
| Mouth depth | 80 mm |
| Dimension (W x H x L) | 22 mm x 46.9 mm x 96 mm |
| Housing material | Metal |
| Metal housing | Diecast zinc, galvanic nickel coating |
| Net weight | 270 g |
| Housing color | Silver |
| Type of fastening | Mounting thread Through-hole mounting |
| Type of display | LED |
| Number of LEDs | 4 Piece(s) |
| Operational controls | Control buttons |
| The function of the operational control | Dynamic teach on label carrier and label |
Product Documentation: IGSU14E/1WT.3-M12V
Related Products: IGSU14E/1WT.3-M12V
GS 63B/6,200-S12 – 50128002
Label Gap Sensor, Model No: GS 63B/6,200-S12, Part Number: 50128002, Series: Fork type GS 63, Principle of physics: Optical Sensor, Label width: 2 mm, Label gap: 2 mm, Light source: Infrared LED, Supply voltage: 10 to 30 VDC, Connection: Cable with Connector, Cable length: 200 mm, Thread size: M12, Number of pins: 5-pin.
GSU12/6GX.3-M12 – 50142879
Label Gap Sensor, Model No: GSU12/6GX.3-M12, Part Number: 50142879, Series: Fork type GS 12, Principle of physics: Ultrasonic Fork Sensor, Label width: 4 mm, Label gap: 2 mm, Supply voltage: 12 to 30 VDC, Connection: Connector type, Thread size: M12, Number of pins: 5-pin.
GS 63B/6D.3-S8 – 50128008
Label Gap Sensor, Model No: GS 63B/6D.3-S8, Part Number: 50128008, Series: Fork type GS 63, Principle of physics: Optical Sensor, Label width: 2 mm, Label gap: 2 mm, Light source: Infrared LED, Supply voltage: 10 to 30 VDC, Connection: Connector type, Thread size: M8, Number of pins: 4-pin.
GS 61/6.2-S8 – 50110108
Leuze Label Gap Sensor, Model No: GS 61/6.2-S8, Part Number: 50110108, Series: Fork type GS 61, Principle of physics: Optical Sensor, Label width: 2 mm, Label gap: 2 mm, Supply voltage: 10 to 30 VDC, Light source: Infrared LED, Connection: Connector type, Thread size: M8, Number of pins: 4-pin.
GSU 14D/66D.3-S12 – 50126782
Label Gap Sensor, Model No: GSU 14D/66D.3-S12, Part Number: 50126782, Series: Fork type GS 14, Principle of physics: Ultrasonic Sensor, Label width: 10 mm, Label gap: 2 mm, Supply voltage: 12 to 30 VDC, Connection: Connector type, Thread size: M12, Number of pins: 5-pin.
GSU12/G6.3-M8 – 50145982
Leuze Label Gap Sensor, Model No: GSU12/G6.3-M8, Part Number: 50145982, Series: Fork type GS 12, Principle of physics: Ultrasonic Sensor, Label width: 4 mm, Label gap: 2 mm, Supply voltage: 12 to 30 VDC, Connection: Connector type, Thread size: M8, Number of pins: 4-pin.
GS 61/6,200-S12 – 50112423
Label Gap Sensor, Model No: GS 61/6,200-S12, Part Number: 50112423, Series: Fork type GS 61, Principle of physics: Optical Fork Sensor, Label width: 2 mm, Label gap: 2 mm, Supply voltage: 10 to 30 VDC, Light source: Infrared LED, Connection: Cable with Connector, Cable length: 200 mm, Thread size: M12, Number of pins: 5-pin.
GS 63B/6-S8V – 50128012
Label Gap Sensor, Model No: GS 63B/6-S8V, Part Number: 50128012, Series: Fork type GS 63, Principle of physics: Optical Sensor, Label width: 2 mm, Label gap: 2 mm, Light source: Infrared LED, Supply voltage: 10 to 30 VDC, Connection: Connector type, Thread size: M8, Number of pins: 4-pin.
GK 14/24 L.2 – 50031714
Leuze Label Gap Sensor, Model No: GK 14/24 L.2, Part Number: 50031714, Series: Fork type GK 14, Principle of physics: Capacitive Fork Sensor, Label width: 10 mm, Label gap: 2 mm, Supply voltage: 10 to 30 VDC, Light source: Infrared LED, Connection: Connector type, Thread size: M12, Number of pins: 5-pin.
GS 61/6D-S8.3 – 50110762
Leuze Gap Sensor, Model No: GS 61/6D-S8.3, Part Number: 50110762, Series: Fork type GS 61, Principle of physics: Optical Sensor, Label width: 2 mm, Label gap: 2 mm, Supply voltage: 10 to 30 VDC, Light source: Infrared LED, Connection: Connector type, Thread size: M8, Number of pins: 3-pin.
The Leuze IGSU14E/1WT.3-M12V ultrasonic fork sensor, part number 50142873, is designed to detect transparent and non-transparent labels based on the principle of ultrasonics physics. The sensor can detect labels with a minimum width of 4mm and a minimum gap of 2mm. It belongs to the GS 14 series and has a label identification fork type.
The sensor features an ALC function for tracking, manual fine-tuning of the switching threshold, and one teach input. The teach input is a DC voltage type with an input resistance of 15,000 Ω and a high switching voltage of ≥9V and a low switching voltage of ≤2V. It also has a warning output and an easyTeach function for easy adjustment.
The device operates with a supply voltage of 18-30V DC and has an open-circuit current of 0-60mA. It has two digital switching outputs that can handle a maximum switching current of 100mA and a switching frequency of 2,000 Hz. The switching principle for Output 1 is IO-Link/NPN light switching in the gap or PNP dark switching on the label. For Output 2, it is active low, where the normal operation is high, and the event case is low.
The Leuze ultrasonic sensor IGSU14E-1WT.3-M12V has a response time of 0.2 ms and a readiness delay of 300 ms. During Teach-In, the device has a maximum belt speed of 50m/min and uses a male, 5-pin A-coded connector for connection.
The IGSU14E/1WT.3-M12 sensor has a fork design with a 4mm mouth width and 80mm mouth depth. It has a metal housing made of diecast zinc with a galvanic nickel coating, and its dimensions are 22mm x 46.9mm x 96mm. The device has four LEDs for display and control buttons for operational control. Its operational control function is dynamic teach on label carrier and label.
The Leuze IGSU14E-1WT-3-M12V ultrasonic sensor is compatible with the Smart Sensor Profile and supports SIO mode. It has a net weight of 270g and a silver housing color. The sensor can be mounted using a mounting thread or through-hole mounting.