Delta DVP04DA-S2 Analog Output Module
Delta DVP04DA-S2 Programmable Logic Controller Module is a compact Analog output module designed for precise signal control in industrial automation systems. It provides four channels of Analog output supporting voltage (0–10V) and current (0–20 mA), ensuring stable and accurate performance with 12-bit resolution. The built-in RS-485 interface enables smooth communication with control systems, making integration simple across automation setups. This module is widely used in applications requiring reliable output control for drives, process equipment, and monitoring systems. Manufactured by Delta automation, it belongs to the PLC control systems range and the DVP series modules used in industrial environments.
| Brand | Delta |
| Product Type | Programmable Logic Controller |
| Model Number | DVP04DA-S2 |
Delta DVP04DA-S2 Programmable Logic Controller - Technical Specifications
| Specification | Value |
|---|---|
| Built-in | RS-485 interface |
| Power Supply Voltage | 24VDC (-15%~20%) |
| Resolution | 12-bit |
| Analog I/O Modules | 4 points of Analog |
| Fuse capacity | ES: 2A/ 250VAC; SV: 2.5A/ 30VDC |
| Power Consumption | 4W |
| Voltage input/output | output voltage (0V~+10V) |
| Current input/output | output current (0 mA~+20 mA) |
| Spike Voltage Durability | 1500VAC (Primary-secondary); 1500VAC (Primary-PE); 500VAC (Secondary-PE) |
| Insulation Impedance | >5 MΩ (all I/O point-to-ground: 500VDC) |
| Noise Immunity | ESD: 8 kV Air Discharge EFT: Power Line, 2 kV Digital I/O: 1 kV Analog & Communication I/O: 1 kV RS: 26 MHz~1GHz, 10V/m |
| Earth | The diameter of grounding wire shall not be shorter than that of the power supply cable. (When many PLCs are in use at the same time, please make sure every PLC is properly grounded.) |
| Storagr Operation Temperature | Storage: -25ºC ~70ºC (temperature) Operation: 0ºC ~55ºC (temperature) |
| Storage Operation Humidity | Storage: -25ºC ~70ºC (temperature) Operation: 0ºC ~55ºC (temperature) |
| Response Time | 3ms x channel |
| Input Signal Voltage | 24VDC ±10% (5 mA) |
The DVP04DA-S2 is designed for stable Analog output control in industrial automation systems that require accurate voltage and current signal transmission. It provides four Analog output channels, supporting precise control across process automation, motion applications, and proportional control systems. Its compact module structure allows efficient installation inside control panels while maintaining dependable operation during continuous industrial use.
Built-in RS-485 communication enables smooth integration within industrial control networks without additional communication hardware. Operating on a 24VDC power supply, the module maintains stable output performance under varying electrical conditions. Internal protection architecture and resistance to electrical noise support reliable operation in factory environments where long-term signal consistency is essential.
Applications requiring accurate Analog signal output for monitoring, regulation, and equipment control commonly use the DVP04DA-S2 within automation systems. Integration with Delta PLC architectures allows flexible expansion of output functionality across industrial control panels. This relationship between Analog control capability, communication support, and system integration makes the DVP04DA-S2 a practical solution for automation processes requiring stable and precise output management.
Related Products
