+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8VS-03005 Power Supply

Omron S8VS-03005 SMPS is a 30 W switch mode power supply configured to provide 5 VDC with 4 A rated output current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting for installation inside industrial electrical cabinets. Screw terminals and terminal blocks provide fixed wiring connections for the input and output circuits. Typical efficiency is specified at 74% with both 100 VAC and 200 VAC input. A green output indicator provides operating status. Its 5 VDC output and 4 A capacity provide more current than the lower-power 15 W 5 VDC configuration. Within the S8VS Series, the S8VS-03005 provides a DIN rail 30 W, 5 VDC configuration. Compare other 30W 5V power supplies from Omron machine control products.

Omron S8VS-03005 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8VS-03005

Omron S8VS-03005 Power Supply - Technical Specifications

SpecificationValue
Power rating30 W
Output voltage5 VDC
Rated output current4 A
Terminal typeScrew Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency74% typ. (at 100 VAC input) 74% typ. (at 200 VAC input)
Rated input voltage100 to 240 VAC
Rated input current0.9 A max., 0.66 A typ. (at 100 VAC input) 0.6 A max., 0.4 A typ. (at 200 VAC input)
Input Leakage current0.5 mA max. (at 100 VAC input) 1.0 mA max. (at 200 VAC input)
Input Frequency50/60Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15% With V.ADJ
Start-up time500 ms typ. (at 100 VAC input) 360 ms typ. (at 200 VAC input)
Hold time31 ms typ. (at 100 VAC input) 174 ms typ. (at 200 VAC input)
Vibration resistance10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-10 to 60 ?
Ambient temperature (Storage)-25 to 65 ?
Ambient humidity (OperatingStorage)25 to 85%
Cooling fanNo
Weight180 g max.

The Omron S8VS-03005 Power Supply provides 30 W rated power with a 5 VDC output and 4 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for cabinet installation and wiring. Typical efficiency is specified at 74% with both 100 VAC and 200 VAC input. These values define a 5 VDC supply where connected equipment voltage, continuous current requirement, input-source compatibility, rail space, and terminal access should be considered together. Connected loads should require 5 VDC and keep combined current demand within the rated 4 A output.

A lower-power 5 VDC model can be considered where the connected load requires less current. The 15 W S8VS configuration provides 2 A at the same nominal output voltage, allowing selection to focus on required current capacity after voltage compatibility is confirmed. This provides a direct same-voltage comparison within the series. For a lower-capacity DIN rail 5 VDC model, compare the Omron S8VS-01505.