+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8VS-06024A Power Supply

Omron S8VS-06024A SMPS is a 60 W switch mode power supply configured to deliver 24 VDC with 2.5 A rated output current. It operates from 100 to 240 VAC at 50/60 Hz and uses DIN rail mounting for structured installation inside electrical control panels. Screw terminals and terminal blocks provide fixed connections for incoming power and the 24 VDC output circuit. Typical efficiency is specified at 83% with 100 VAC input and 85% with 200 VAC input. A green output indicator provides operating status. Within the S8VS Series, the S8VS-06024A provides a DIN rail 60 W, 24 VDC configuration. Compare other 24V industrial power supplies from Omron control equipment.

Omron S8VS-06024A Power Supply
BrandOmron
ProductPower Supply
Model NumberS8VS-06024A

Omron S8VS-06024A Power Supply - Technical Specifications

SpecificationValue
Power rating60 W
Output voltage24 VDC
Rated output current2.5 A
Terminal typeScrew Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency83% typ. (at 100 VAC input) 85% typ. (at 200 VAC input)
Rated input voltage100 to 240 VAC
Rated input current1.7 A max., 1.3 A typ. (at 100 VAC input) 1 A max., 0.78 A typ. (at 200 VAC input)
Input Leakage current0.5 mA max. (at 100 VAC input) 1.0 mA max. (at 200 VAC input)
Input Frequency50/60Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15% With V.ADJ
Start-up time460 ms typ. (at 100 VAC input) 290 ms typ. (at 200 VAC input)
Hold time33 ms typ. (at 100 VAC input) 154 ms typ. (at 200 VAC input)
Vibration resistance10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-10 to 60 ?
Ambient temperature (Storage)-25 to 65 ?
Ambient humidity (OperatingStorage)25 to 85%
Cooling fanNo
Weight330 g max.

The Omron S8VS-06024A Power Supply provides 60 W rated power with a 24 VDC output and 2.5 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for electrical-panel installation. Typical efficiency is specified at 83% with 100 VAC input and 85% with 200 VAC input. These specifications define a 24 VDC supply where connected equipment voltage, combined current demand, incoming source, DIN rail space, and terminal access should be reviewed together. The connected load should require 24 VDC and remain within the rated 2.5 A continuous output. Its screw-terminal arrangement provides fixed connection points for both the incoming AC side and the outgoing DC circuit.

Other S8VS models retain the same 24 VDC output while increasing power and available current, allowing selection to follow actual load demand. A 120 W configuration provides 5 A, while a 240 W configuration provides 10 A according to the supplied comparison data. The output voltage therefore remains constant while current capacity changes across the family. This makes same-voltage comparisons more useful than selecting by wattage alone. For a higher-capacity DIN rail model providing 120 W, 24 VDC, and 5 A output, compare the Omron S8VS-12024-F.