+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8VS-01512 Power Supply

Omron S8VS-01512 SMPS is a 15 W switch mode power supply configured to provide 12 VDC with 1.2 A rated output current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting for installation with other control-panel components. Screw terminals and terminal blocks provide fixed electrical connections for incoming power and the 12 VDC output circuit. Typical efficiency is specified at 79% with 100 VAC input and 78% with 200 VAC input. A green output indicator provides operating status. The 12 VDC output distinguishes this model from the 5 VDC and 24 VDC versions in the same power class. Within the S8VS Series, the S8VS-01512 provides a DIN rail 15 W, 12 VDC configuration. Compare other 12V SMPS models from Omron control equipment.

Omron S8VS-01512 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8VS-01512

Omron S8VS-01512 Power Supply - Technical Specifications

SpecificationValue
Power rating15 W
Output voltage12 VDC
Rated output current1.2 A
Terminal typeScrew Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency79% typ. (at 100 VAC input) 78% typ. (at 200 VAC input)
Rated input voltage100 to 240 VAC
Rated input current0.45 A max., 0.34 A typ. (at 100 VAC input) 0.25 A max., 0.22 A typ. (at 200 VAC input)
Input Leakage current0.5 mA max. (at 100 VAC input) 1.0 mA max. (at 200 VAC input)
Input Frequency50/60Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15% With V.ADJ
Start-up time530 ms typ. (at 100 VAC input) 360 ms typ. (at 200 VAC input)
Hold time27 ms typ. (at 100 VAC input) 134 ms typ. (at 200 VAC input)
Vibration resistance10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-10 to 60 ?
Ambient temperature (Storage)-25 to 65 ?
Ambient humidity (OperatingStorage)25 to 85%
Cooling fanNo
Weight160 g max.

The Omron S8VS-01512 Power Supply provides 15 W rated power with a 12 VDC output and 1.2 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for installation and wiring. Typical efficiency is specified at 79% with 100 VAC input and 78% with 200 VAC input. These electrical values define a 12 VDC supply where connected equipment voltage, continuous current demand, input compatibility, available rail space, and terminal access should be checked together. Connected loads should require 12 VDC and keep current demand within the rated 1.2 A output.

Comparing this model with higher-power 12 VDC configurations is useful when connected equipment requires the same nominal voltage but additional current. A 30 W model provides 2.5 A, increasing available current while retaining the same 12 VDC output class. Models with different output voltages should not be treated as direct substitutes. For a higher-capacity 12 VDC DIN rail configuration, compare the Omron S8VS-03012.