Omron S8VK-X48024-EIP Power Supply
Omron S8VK-X48024-EIP SMPS is a 480 W switch mode power supply configured to deliver 24 VDC with 20 A rated output current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting for installation inside industrial control cabinets. Push-In Plus terminals and terminal blocks provide fixed electrical connections for the incoming supply and 24 VDC output. Typical efficiency is specified at 92% with 115 VAC input and 94% with 230 VAC input. A green LED provides output status indication. The 20 A output capacity makes this a higher-current 24 VDC configuration within the series. Within the S8VK-X Series, the S8VK-X48024-EIP provides a DIN rail 480 W, 24 VDC configuration. Compare other 24V high-current SMPS models from Omron machine automation.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8VK-X48024-EIP |
Omron S8VK-X48024-EIP Power Supply - Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 480 W |
| Output voltage | 24 VDC |
| Rated output current | 20 A |
| Terminal type | Push-in plus Terminal |
| Mounting method | DIN rail |
| Connection | Terminal blocks |
| Efficiency | 92% typ. (at 115 VAC input) 94% typ. (at 230 VAC input) |
| Rated input voltage | 100 to 240 VAC |
| Rated input current | 4.6 A typ. (at 115 VAC input) 2.3 A typ. (at 230 VAC input) |
| Input Leakage current | 0.5 mA max. (at 115 VAC input) 1 mA max. (at 230 VAC input) |
| Input Frequency | 50/60 Hz |
| Output indicator | Yes (LED: Green) |
| Output voltage variable range | 21.6 to 28 V (With V.ADJ) |
| Start-up time | 1000 ms max. (at 115 VAC input) 1000 ms max. (at 230 VAC input) |
| Hold time | 25 ms typ. (at 115 VAC input) 25 ms typ. (at 230 VAC input) |
| Vibration resistance | 10 to 55 Hz, maximum 5 G, 0.42 mm single amplitude for 2 h each in X, Y, and Z directions |
| Shock resistance | 150 m/s2, in each 6 directions 3 times |
| Ambient temperature (Operating) | ?40 to 70°C |
| Ambient temperature (Storage) | ?40 to 85°C |
| Ambient humidity (OperatingStorage) | 95% max. (Storage humidity: 95% max.) |
| Cooling fan | No |
| Degree of protection | IP20 by EN/IEC 60529 |
| Weight | 1100 g max. |
The Omron S8VK-X48024-EIP Power Supply provides 480 W rated power with a 24 VDC output and 20 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with Push-In Plus terminals and terminal blocks for panel installation. Typical efficiency is specified at 92% with 115 VAC input and 94% with 230 VAC input. These electrical values define a higher-current 24 VDC supply where connected equipment voltage, continuous current demand, incoming source, available rail space, and terminal access should be checked together. Connected loads should require 24 VDC and keep combined current demand within the rated 20 A output.
Comparing this model with lower-power 24 VDC configurations is useful when the nominal load voltage remains unchanged and only required current capacity differs. A 240 W model can provide 10 A and may be sufficient where total load demand is lower. This keeps the comparison focused on actual output requirements rather than wattage alone. For a lower-capacity DIN rail model providing 24 VDC at 10 A, compare the Omron S8VK-G24024.


