+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8VK-X09024A-EIP Power Supply

Omron S8VK-X09024A-EIP SMPS is a 90 W switch mode power supply designed to provide 24 VDC with 3.75 A rated output current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting for installation inside industrial electrical cabinets. Push-In Plus terminals and terminal blocks provide the wiring interface for input and output circuits. Typical efficiency is specified at 86% with 115 VAC input and 87% with 230 VAC input. A green LED provides output status indication. The 24 VDC output and 3.75 A current rating identify this configuration within the 90 W S8VK-X group. Within the S8VK-X Series, the S8VK-X09024A-EIP provides a DIN rail 90 W, 24 VDC configuration. Compare other 24V industrial power supplies from Omron automation.

Omron S8VK-X09024A-EIP Power Supply
BrandOmron
ProductPower Supply
Model NumberS8VK-X09024A-EIP

Omron S8VK-X09024A-EIP Power Supply - Technical Specifications

SpecificationValue
Power rating90 W
Output voltage24 VDC
Rated output current3.75 A
Terminal typePush-in plus Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency86% typ. (at 115 VAC input) 87% typ. (at 230 VAC input)
Rated input voltage100 to 240 VAC
Rated input current1.7 A typ. (at 115 VAC input) 1.0 A typ. (at 230 VAC input)
Input Leakage current0.5 mA max. (at 115 VAC input) 1 mA max. (at 230 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (LED: Green)
Output voltage variable range23.0 to 24.1 V (With V.ADJ)
Start-up time1000 ms max. (at 115 VAC input) 1000 ms max. (at 230 VAC input)
Hold time25 ms typ. (at 115 VAC input) 130 ms typ. (at 230 VAC input)
Vibration resistance10 to 55 Hz, maximum 5 G, 0.42 mm single amplitude for 2 h each in X, Y, and Z directions
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)?40 to 70°C
Ambient temperature (Storage)?40 to 85°C
Ambient humidity (OperatingStorage)95% max. (Storage humidity: 95% max.)
Cooling fanNo
Degree of protectionIP20 by EN/IEC 60529
Weight350 g max.

The Omron S8VK-X09024A-EIP Power Supply provides 90 W rated power with a 24 VDC output and 3.75 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with Push-In Plus terminals and terminal blocks for structured cabinet installation. Typical efficiency is specified at 86% with 115 VAC input and 87% with 230 VAC input. These values define a 24 VDC configuration where connected load voltage, continuous current requirement, source compatibility, rail space, and wiring access should be reviewed together. Connected equipment should require 24 VDC and keep combined load current within the rated 3.75 A output.

Higher-capacity models can maintain the same 24 VDC output while providing additional current for larger connected loads. A 120 W version provides 5 A and therefore offers more available current without changing the required downstream voltage. Selection between the two should follow actual continuous load demand rather than power rating alone. For a higher-capacity 24 VDC DIN rail configuration, compare the Omron S8VK-X12024A-EIP.