Omron S8VK-X09024-EIP Power Supply
Omron S8VK-X09024-EIP SMPS is a 90 W switch mode power supply configured to provide 24 VDC with 3.75 A rated output current. It operates from 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting for structured control-panel installation. Push-In Plus terminals and terminal blocks provide fixed electrical connections for the incoming supply and 24 VDC output. Typical efficiency is specified at 87% with 115 VAC input and 88% with 230 VAC input. A green LED provides output status indication. The 3.75 A capacity positions this model between lower- and higher-current 24 VDC configurations. Within the S8VK-X Series, the S8VK-X09024-EIP provides a DIN rail 90 W, 24 VDC configuration. Compare other 90W 24V power supplies from Omron control products.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8VK-X09024-EIP |
Omron S8VK-X09024-EIP Power Supply - Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 90 W |
| Output voltage | 24 VDC |
| Rated output current | 3.75 A |
| Terminal type | Push-in plus Terminal |
| Mounting method | DIN rail |
| Connection | Terminal blocks |
| Efficiency | 87% typ. (at 115 VAC input) 88% typ. (at 230 VAC input) |
| Rated input voltage | 100 to 240 VAC |
| Rated input current | 1.7 A typ. (at 115 VAC input) 1.0 A typ. (at 230 VAC input) |
| Input Leakage current | 0.5 mA max. (at 115 VAC input) 1 mA max. (at 230 VAC input) |
| Input Frequency | 50/60 Hz |
| Output indicator | Yes (LED: Green) |
| Output voltage variable range | 23.0 to 24.1 V (With V.ADJ) |
| Start-up time | 1000 ms max. (at 115 VAC input) 1000 ms max. (at 230 VAC input) |
| Hold time | 25 ms typ. (at 115 VAC input) 130 ms typ. (at 230 VAC input) |
| Vibration resistance | 10 to 55 Hz, maximum 5 G, 0.42 mm single amplitude for 2 h each in X, Y, and Z directions |
| Shock resistance | 150 m/s2, in each 6 directions 3 times |
| Ambient temperature (Operating) | ?40 to 70°C |
| Ambient temperature (Storage) | ?40 to 85°C |
| Ambient humidity (OperatingStorage) | 95% max. (Storage humidity: 95% max.) |
| Cooling fan | No |
| Degree of protection | IP20 by EN/IEC 60529 |
| Weight | 350 g max. |
The Omron S8VK-X09024-EIP Power Supply provides 90 W rated power with a 24 VDC output and 3.75 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with Push-In Plus terminals and terminal blocks for panel installation. Typical efficiency is specified at 87% with 115 VAC input and 88% with 230 VAC input. These electrical values place the model between lower-current 60 W and higher-current 120 W configurations in the 24 VDC class. Connected equipment should require 24 VDC and remain within the rated 3.75 A output, while source compatibility, available rail space, and terminal access should also be checked.
Because other S8VK-X models retain the same 24 VDC output, their current ratings can be compared directly after input compatibility has been confirmed. Moving to a 120 W configuration increases available current to 5 A without changing the nominal output voltage. This makes load demand the main reason to move between these power levels. For a higher-capacity DIN rail model providing 24 VDC at 5 A, compare the Omron S8VK-X12024-EIP.


