+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8VK-WB96024 Power Supply

Omron S8VK-WB96024 SMPS is a 960 W switch mode power supply designed to provide 24 VDC with 40 A rated output current. It accepts three-phase or two-phase 380 to 480 VAC input at 50/60 Hz. DIN rail mounting supports structured cabinet installation, while Push-In Plus terminals and terminal blocks provide fixed wiring connections. Typical efficiency is specified at 95% with three-phase 400 VAC input and 94% with three-phase 480 VAC input. A green LED provides output status indication. Within the S8VK-WB Series, the S8VK-WB96024 provides a DIN rail 960 W, 24 VDC configuration. Compare other 960W industrial power supplies from Omron industrial automation.

Omron S8VK-WB96024 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8VK-WB96024

Omron S8VK-WB96024 Power Supply - Technical Specifications

SpecificationValue
Power rating960 W
Output voltage24 VDC
Rated output current40 A
Terminal typePush-in plusTerminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency90% min., 95% typ. (at three-phase 380 VAC input) 95% typ. (at two-phase 380 VAC input) 91% min., 95% typ. (Three-phase 400 VAC input) 95% typ. (Two-phase 400 VAC input) 90% min., 94% typ. (at three-phase 480 VAC input) 95% typ. (at two-phase 480 VAC input)
Rated input voltage380 to 480 VAC (Three-phase / two-phase)
Rated input current1.8 A max., 1.7 A typ. (at three-phase 380 VAC input) 3.4 A max., 3.2 A typ. (at two-phase 380 VAC input) 1.8 A max., 1.6 A typ. (Three-phase 400 VAC input) 3.2 A max., 3.0 A typ. (Two-phase 400 VAC input) 1.5 A max., 1.3 A typ. (at three-phase 480 VAC input) 2.6 A max., 2.4 A typ. (at two-phase 480 VAC input)
Input Leakage current3.5 mA max. (Three-phase 400 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (LED: Green)
Output voltage variable range24 to 29.5 V (with V.ADJ)
Start-up time1000 ms max. (Three-phase 400 VAC input)
Hold time16 ms min., 20 ms typ. (Three-phase 400 VAC input)
Vibration resistance10 to 55 Hz, maximum 5 G, 0.42 mm single amplitude for 2 h each in X, Y, and Z directions
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)?40 to 70°C
Ambient temperature (Storage)?40 to 85°C
Ambient humidity (OperatingStorage)95% max. (Storage humidity: 95% max.)
Cooling fanNo
Degree of protectionIP20 by EN/IEC 60529
Weight1800 g max.

The Omron S8VK-WB96024 Power Supply provides 960 W rated power with a 24 VDC output and 40 A rated current. It accepts three-phase or two-phase 380 to 480 VAC input at 50/60 Hz. DIN rail mounting, Push-In Plus terminals, and terminal blocks provide the installation and wiring arrangement for industrial control cabinets. Typical efficiency is specified at 95% with three-phase 400 VAC input and 94% with three-phase 480 VAC input. These values define a high-capacity 24 VDC supply where connected load voltage, total current demand, source compatibility, DIN rail space, and terminal access should be considered together. Connected equipment should require 24 VDC and keep continuous current demand within the rated 40 A output.

The input range describes source compatibility separately from the 24 VDC requirement of downstream equipment. Comparing models with the same output voltage allows current capacity and wattage to become the main electrical differences. A lower-power 24 VDC model can be selected when the connected load does not require the full 40 A capacity. For a lower-capacity DIN rail model providing 24 VDC at 20 A, compare the Omron S8VK-X48024-EIP.