+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8VK-WA96024 Power Supply

Omron S8VK-WA96024 SMPS is a 960 W switch mode power supply configured to provide 24 VDC with 40 A rated output current. It accepts 200 to 240 VAC at 50/60 Hz with three-phase, single-phase, or two-phase input connections. DIN rail mounting supports organized electrical-panel installation, while Push-In Plus terminals and terminal blocks provide the wiring interface. Typical efficiency is specified at 95% with three-phase 200 VAC and three-phase 230 VAC input. A green LED provides output status indication. The 40 A output rating distinguishes this model as a higher-capacity 24 VDC configuration. Within the S8VK-WA Series, the S8VK-WA96024 provides a DIN rail 960 W, 24 VDC configuration. Compare other high-capacity 24V power supplies from Omron industrial automation.

Omron S8VK-WA96024 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8VK-WA96024

Omron S8VK-WA96024 Power Supply - Technical Specifications

SpecificationValue
Power rating960 W
Output voltage24 VDC
Rated output current40 A
Terminal typePush-In Plus Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency95 % typ.(at three-phase 200 VAC input) 94 % typ.(Single-phase/two-phase 200 VAC input Single-phase/two-phase 200 VAC input) 95 % typ.(at three-phase 230 VAC input) 95 % typ.(Single-phase/two-phase 230 VAC input)
Rated input voltage200 to 240 VAC(Three-phase/single-phase/two-phase)
Rated input current3.1 A typ.(at three-phase 200 VAC input) 5.2 A typ.(Single-phase/two-phase 200 VAC input Single-phase/two-phase 200 VAC input) 2.7 A typ.(at three-phase 230 VAC input) 4.5 A typ.(Single-phase/two-phase 230 VAC input)
Input Leakage current1.0 mA max.(at three-phase 200 VAC input) 1.0 mA max.(at three-phase 230 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (LED: Green)
Output voltage variable range24 to 28 V (with V.ADJ)
Start-up time1000 ms max.(at three-phase 200 VAC input) 1000 ms max.(at three-phase 230 VAC input)
Hold time25 ms typ.(at three-phase 200 VAC input) 25 ms typ.(at three-phase 230 VAC input)
Vibration resistance10 to 55 Hz, maximum 5 G, 0.42 mm single amplitude for 2 h each in X, Y, and Z directions
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)?40 to 70°C
Ambient temperature (Storage)?40 to 85°C
Ambient humidity (OperatingStorage)95% max. (Storage humidity: 95% max.)
Cooling fanNo
Degree of protectionIP20 by EN/IEC 60529
Weight1750 g max.

The Omron S8VK-WA96024 Power Supply provides 960 W rated power with a 24 VDC output and 40 A rated current. It accepts 200 to 240 VAC input at 50/60 Hz with three-phase, single-phase, or two-phase connection arrangements. DIN rail mounting, Push-In Plus terminals, and terminal blocks provide the mechanical installation and wiring interface. Typical efficiency is specified at 95% with three-phase 200 VAC and three-phase 230 VAC input. These electrical values define a high-capacity 24 VDC supply where connected current demand, incoming phase arrangement, DIN rail space, and terminal access should be checked before installation. The combined continuous load should remain within the rated 40 A output.

Since the lower-capacity S8VK-WA models also provide 24 VDC, selection between them can focus on required current and available wattage rather than changing the downstream voltage class. A 480 W configuration provides 20 A and may be appropriate where total load demand does not require the 40 A capacity of this model. For a lower-capacity 24 VDC DIN rail configuration, compare the Omron S8VK-WA48024.