+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8VK-WA20224 Power Supply

Omron S8VK-WA20224 SMPS is a 202 W switch mode power supply configured with a 24 VDC output for industrial control systems. It accepts 200 to 240 VAC at 50/60 Hz and supports three-phase, single-phase, or two-phase input connections. DIN rail mounting provides structured panel installation, while Push-In Plus terminals and terminal blocks provide the electrical wiring interface. Typical efficiency is specified at 95% with three-phase 200 VAC input and 96% with three-phase 230 VAC input. A green LED provides output status indication. Within the S8VK-WA Series, the S8VK-WA20224 provides a DIN rail 24 VDC configuration. Compare other 24V industrial SMPS models from Omron automation equipment.

Omron S8VK-WA20224 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8VK-WA20224

Omron S8VK-WA20224 Power Supply - Technical Specifications

SpecificationValue
Power rating202 W
Output voltage24 VDC
Rated output current85 A
Terminal typePush-In Plus Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency95 % typ.(at three-phase 200 VAC input) 95 % typ.(Single-phase/two-phase 200 VAC input Single-phase/two-phase 200 VAC input) 96 % typ.(at three-phase 230 VAC input) 95 % typ.(Single-phase/two-phase 230 VAC input)
Rated input voltage200 to 240 VAC(Three-phase/single-phase/two-phase)
Rated input current6.5 A typ.(at three-phase 200 VAC input) 11 A typ.(Single-phase/two-phase 200 VAC input Single-phase/two-phase 200 VAC input) 5.7 A typ.(at three-phase 230 VAC input) 9.5 A typ.(Single-phase/two-phase 230 VAC input)
Input Leakage current3.5 mA max.(at three-phase 200 VAC input) 3.5 mA max.(at three-phase 230 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (LED: Green)
Output voltage variable range24 to 28 V (With V.ADJ)
Start-up time1000 ms max.(at three-phase 200 VAC input) 1000 ms max.(at three-phase 230 VAC input)
Hold time25 ms typ.(at three-phase 200 VAC input) 25 ms typ.(at three-phase 230 VAC input)
Vibration resistance10 to 55 Hz, maximum 5 G, 0.42 mm single amplitude for 2 h each in X, Y, and Z directions
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)?40 to 70°C
Ambient temperature (Storage)?40 to 85°C
Ambient humidity (OperatingStorage)95% max. (Storage humidity: 95% max.)
Cooling fanNo
Degree of protectionIP20 by EN/IEC 60529
Weight3200 g

The Omron S8VK-WA20224 Power Supply provides 202 W rated power with a 24 VDC output according to the supplied specifications. It accepts 200 to 240 VAC at 50/60 Hz and supports three-phase, single-phase, or two-phase input connections. DIN rail mounting, Push-In Plus terminals, and terminal blocks provide the installation and wiring arrangement. Typical efficiency is specified at 95% with three-phase 200 VAC input and 96% with three-phase 230 VAC input. A green LED provides output status indication. These characteristics define a DIN rail 24 VDC configuration where output-voltage compatibility, incoming phase arrangement, source voltage, rail space, and terminal access should be considered before installation.

The supplied data lists an output-current value that does not align clearly with the stated 202 W and 24 VDC ratings, so it should be verified against the manufacturer specification before using that current value for load calculations. The supported input arrangements nevertheless allow comparison with other S8VK-WA models based on output voltage, wattage, mounting, and connection method. For a 240 W DIN rail model with a clearly specified 24 VDC, 10 A output, compare the Omron S8VK-WA24024.