+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8VK-WA20248 Power Supply

Omron S8VK-WA20248 SMPS is a 202 W switch mode power supply designed around a 48 VDC output for industrial DC power distribution. It accepts 200 to 240 VAC at 50/60 Hz with three-phase, single-phase, or two-phase input configurations. DIN rail mounting supports organized panel installation, while Push-In Plus terminals and terminal blocks provide the wiring connections. Typical efficiency is specified at 96% with three-phase 200 VAC and three-phase 230 VAC input. A green LED provides output status indication. The 48 VDC output distinguishes this configuration from the 24 VDC versions in the same family. Within the S8VK-WA Series, the S8VK-WA20248 provides a DIN rail 48 VDC configuration. Compare other 48V industrial power supplies from Omron industrial controls.

Omron S8VK-WA20248 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8VK-WA20248

Omron S8VK-WA20248 Power Supply - Technical Specifications

SpecificationValue
Power rating202 W
Output voltage48 VDC
Rated output current45 A
Terminal typePush-In Plus Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency96 % typ.(at three-phase 200 VAC input) 95 % typ.(Single-phase/two-phase 200 VAC input Single-phase/two-phase 200 VAC input) 96 % typ.(at three-phase 230 VAC input) 96 % typ.(Single-phase/two-phase 230 VAC input)
Rated input voltage200 to 240 VAC(Three-phase/single-phase/two-phase)
Rated input current6.9 A typ.(at three-phase 200 VAC input) 12 A typ.(Single-phase/two-phase 200 VAC input Single-phase/two-phase 200 VAC input) 6.0 A typ.(at three-phase 230 VAC input) 10 A typ.(Single-phase/two-phase 230 VAC input)
Input Leakage current3.5 mA max.(at three-phase 200 VAC input) 3.5 mA max.(at three-phase 230 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (LED: Green)
Output voltage variable range48 to 56 V (With V.ADJ)
Start-up time1000 ms max.(at three-phase 200 VAC input) 1000 ms max.(at three-phase 230 VAC input)
Hold time25 ms typ.(at three-phase 200 VAC input) 25 ms typ.(at three-phase 230 VAC input)
Vibration resistance10 to 55 Hz, maximum 5 G, 0.42 mm single amplitude for 2 h each in X, Y, and Z directions
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)?40 to 70°C
Ambient temperature (Storage)?40 to 85°C
Ambient humidity (OperatingStorage)95% max. (Storage humidity: 95% max.)
Cooling fanNo
Degree of protectionIP20 by EN/IEC 60529
Weight3200 g

The Omron S8VK-WA20248 Power Supply provides 202 W rated power with a 48 VDC output according to the supplied specifications. It accepts 200 to 240 VAC input at 50/60 Hz with three-phase, single-phase, or two-phase connection options. DIN rail mounting, Push-In Plus terminals, and terminal blocks provide the physical installation and electrical wiring arrangement. Typical efficiency is specified at 96% with three-phase 200 VAC and three-phase 230 VAC input. A green LED provides output status indication. The 48 VDC output distinguishes this configuration from the 24 VDC members of the S8VK-WA family, so connected equipment must first be checked for the correct nominal voltage before wattage or current is compared.

The supplied current figure for this model does not align clearly with the stated 202 W and 48 VDC ratings and should be confirmed from the manufacturer data before it is used for electrical sizing. Output-voltage compatibility should therefore remain the primary comparison point with other S8VK-WA models. A 24 VDC model belongs to a different output class even when the mounting and input arrangements are similar. For the 24 VDC configuration listed at the same 202 W power level, compare the Omron S8VK-WA20224.