Omron S8VK-T12024 Power Supply
Omron S8VK-T12024 SMPS is a 120 W switch mode power supply designed to provide 24 VDC with 5 A rated output current from higher-voltage industrial input systems. It accepts 380 to 480 VAC using three-phase or two-phase input and also supports 450 to 600 VDC at 50/60 Hz. DIN track mounting with rod terminals and terminal blocks provides the installation and wiring arrangement. Typical efficiency is specified at 89% with three-phase 400 VAC input. A green LED provides output-status indication, and the enclosure carries an IP20 protection rating. Within the S8VK-T Series, the S8VK-T12024 provides a 120 W, 24 VDC configuration. Compare other three-phase industrial power supplies from Omron control solutions.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8VK-T12024 |
Omron S8VK-T12024 Power Supply – Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 120 W |
| Output voltage | 24 VDC |
| Rated output current | 5 A |
| Terminal type | Rod terminal |
| Mounting method | DIN track mounting |
| Construction | Covered type |
| Connection | Terminal blocks |
| Efficiency | 89% typ. (Three-phase 400 VAC input) |
| Rated input voltage | 380 to 480 VAC (Three-phase / two-phase)450 to 600 VDC |
| Rated input current | 0.40 A typ. (Three-phase 400 VAC input) |
| Input Leakage current | 3.5 mA max., 0.70 mA typ. (Three-phase 400 VAC input) |
| Input Frequency | 50/60Hz (47 to 63 Hz) |
| Output indicator | Yes (LED, color: green, lighting from 80 to 90% or more of rated voltage) |
| Output voltage variable range | 24 to 29.5 VDC With V.ADJ |
| Maximum peak current | 6 A |
| Start-up time | 600 ms typ. (Three-phase 400 VAC input) |
| Hold time | 35 ms typ. (Three-phase 400 VAC input) |
| Vibration resistance | 10 to 55 Hz, 0.375 mm Single amplitude in every 3 directions for 2 hours |
| Shock resistance | 150 m/s2, in each 6 directions 3 times |
| Ambient temperature (Operating) | -40 to 70 ? (with no freezing or condensation) |
| Ambient temperature (Storage) | -40 to 85 ? (with no freezing or condensation) |
| Ambient humidity (OperatingStorage) | 95% max. |
| Degree of protection | IP20, EN/IEC 60529 |
| Weight (Main) | 850 g max. |
The Omron S8VK-T12024 Power Supply provides 120 W rated power with a 24 VDC output and 5 A rated current. It accepts 380 to 480 VAC using three-phase or two-phase input and also supports 450 to 600 VDC at 50/60 Hz. DIN track mounting with rod terminals and terminal blocks provides the installation and electrical connection arrangement. Typical efficiency is specified at 89% with three-phase 400 VAC input, and a green LED provides output-status indication. The enclosure carries an IP20 protection rating. Its higher-voltage input architecture is an important difference from single-phase S8VK models, so the available incoming supply should be confirmed before comparing output capacity. Connected equipment should require 24 VDC and keep combined current demand within the rated 5 A output. Input phase, voltage range, output voltage, output current, rated power, mounting format, and terminal type should all be evaluated during model selection. A different S8VK product may provide the same 120 W, 24 VDC, and 5 A output while accepting a completely different incoming source, meaning equal output ratings do not make the models interchangeable on the input side. For a 120 W 24 VDC model rated at 5 A from another S8VK configuration, compare the Omron S8VK-C12024.


