+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8VK-C24024 SMPS 24V 10A Power Supply

Omron S8VK-C24024 SMPS is a 240 W switch mode power supply designed to provide 24 VDC with 10 A rated output current. It accepts single-phase 100 to 240 VAC or 90 to 350 VDC input and operates at 50/60 Hz. Typical efficiency is specified at 89%, while a green output indicator provides operating status. The 24 VDC output and 10 A current capacity position this model above the 60 W and 120 W S8VK-C configurations for higher current requirements. An IP20 protection rating is specified for the unit. Within the S8VK-C Series, the S8VK-C24024 provides a 240 W, 24 VDC configuration. Compare other 240W 24V power supplies from Omron automation.

Omron S8VK-C24024 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8VK-C24024

Omron S8VK-C24024 SMPS 24V 10A Power Supply – Technical Specifications

SpecificationValue
Power rating240 W
Output voltage24 V
Rated output current10 A
Efficiency89%
Rated input voltageSingle-phase 100 to 240 VAC 90 to 350 VDC
Input Frequency50/60 Hz (47 to 63 Hz)
Current 115 VAC input2.5 A
Current 230 VAC input1.3 A
Output Voltage adjustment range–10% to 15% (with V.ADJ)
Overvoltage protectionYes
Parallel operationNo
Ambient operating temperature–25 to 60°C (Refer to Engineering Data)
Ambient operating humidity20% to 90% (Storage humidity: 10% to 95%)
Output indicatorYes (color: green), lighting from 80% to 90% or more of rated voltage
Safety standardsUL Listed: UL508 (Listing)UL UR: UL No. 62368-1 (Recognition)cUL: CSA C22.2 No.107.1cUR: CSA C22.2 No.62368-1EN: EN 62477-1, EN 62368-1BIS: IS 13252 (Part1)
Degree of protectionIP20 by EN / IEC60529

The Omron S8VK-C24024 Power Supply provides 240 W rated power with a 24 V output and 10 A rated current. It accepts single-phase 100 to 240 VAC or 90 to 350 VDC input and has a stated efficiency of 89%. A green indicator provides operating status, while the enclosure carries an IP20 protection rating. These ratings define a higher-current 24 V configuration where connected load voltage, combined current demand, source compatibility, available installation space, and electrical connection arrangement should be evaluated together. Connected equipment should operate from 24 V and keep total current demand within the rated 10 A output.

The input range identifies the supported incoming power source separately from the DC output requirements of the load. Within the S8VK-C family, models can retain the same nominal 24 V output while increasing available current through higher power ratings. Output-current demand is therefore an important distinction after voltage compatibility is confirmed. For a higher-capacity model providing 24 VDC at 20 A from 480 W, compare the Omron S8VK-C48024.