+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8TS-06024-E1 Power Supply

Omron S8TS-06024-E1 SMPS is a 60 W switch mode power supply designed to deliver 24 VDC with 2.5 A rated output current. It operates from 100 to 240 VAC at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for fixed electrical-panel wiring. Typical efficiency is specified at 80% with both 100 VAC and 200 VAC input. A green output indicator provides operating status. Its 24 VDC output and 2.5 A capacity place this model within the 60 W S8TS configurations. Within the S8TS Series, the S8TS-06024-E1 provides a DIN rail 60 W, 24 VDC configuration. Compare other 24V industrial SMPS models from Omron machine automation.

Omron S8TS-06024-E1 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8TS-06024-E1

Omron S8TS-06024-E1 Power Supply - Technical Specifications

SpecificationValue
Power rating60 W
Output voltage24 VDC
Rated output current2.5 A
Terminal typeScrew Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency80% typ. (at 100 VAC input) 80% typ. (at 200 VAC input)
Rated input voltage100 to 240 VAC
Rated input current1 A max. (at single operation, 100 VAC input) 0.5 A max. (at single operation, 200 VAC input)
Input Leakage current0.35 mA max. (at 100 VAC input) 0.7 mA max. (at 240 VAC input)
Input Frequency50/60Hz
Output indicatorYes (color: green)
Output voltage variable range22 to 28 V (With V.ADJ)
Start-up time1000 ms typ. (at 100 VAC input) 1000 ms typ. (at 200 VAC input)
Hold time20 ms min. (at 100 VAC input) 20 ms min. (at 200 VAC input)
Vibration resistance10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-20 to 50 ?
Ambient temperature (Storage)-25 to 65 ?
Ambient humidity (OperatingStorage)25 to 85%
Cooling fanNo
Weight450 g max.

The Omron S8TS-06024-E1 Power Supply provides 60 W rated power with a 24 VDC output and 2.5 A rated current. It operates from 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for fixed panel wiring. Typical efficiency is specified at 80% with both 100 VAC and 200 VAC input. These ratings identify a 24 VDC supply where connected equipment should require the specified output voltage and maintain total current demand within 2.5 A. Incoming supply compatibility, available DIN rail space, and terminal access should also be considered during installation planning.

The input rating and output requirement describe separate sides of the power supply and should be checked independently. Comparing this configuration with a 12 VDC model should therefore begin with equipment voltage requirements before considering wattage or current rating. A model sharing the same 2.5 A current rating can still serve a different load because of its output voltage. For a 30 W DIN rail configuration delivering 12 VDC at 2.5 A, compare the Omron S8TS-03012.