Omron S8TS-03012 Power Supply
Omron S8TS-03012 SMPS is a 30 W switch mode power supply configured to provide 12 VDC with 2.5 A rated output current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting for structured installation inside machine and control panels. Screw terminals and terminal blocks provide fixed connections for incoming power and the 12 VDC output circuit. Typical efficiency is specified at 73% with both 100 VAC and 200 VAC input. The 12 VDC output and 2.5 A capacity define this configuration within the S8TS family. Within the S8TS Series, the S8TS-03012 provides a DIN rail 30 W, 12 VDC configuration. Compare other 12V industrial power supplies from Omron automation products.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8TS-03012 |
Omron S8TS-03012 Power Supply - Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 30 W |
| Output voltage | 12 VDC |
| Rated output current | 2.5 A |
| Terminal type | Screw Terminal |
| Mounting method | DIN rail |
| Connection | Terminal blocks |
| Efficiency | 73% typ. (at 100 VAC input) 73% typ. (at 200 VAC input) |
| Rated input voltage | 100 to 240 VAC |
| Rated input current | 0.7 A max. (at single operation, 100 VAC input) 0.4 A max. (at single operation, 200 VAC input) |
| Input Leakage current | 0.35 mA max. (at 100 VAC input) 0.7 mA max. (at 240 VAC input) |
| Input Frequency | 50/60Hz |
| Output indicator | Yes (color: green) |
| Output voltage variable range | ±10% (With V.ADJ) |
| Start-up time | 1000 ms typ. (at 100 VAC input) 1000 ms typ. (at 200 VAC input) |
| Hold time | 20 ms min. (at 100 VAC input) 20 ms min. (at 200 VAC input) |
| Vibration resistance | 10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours |
| Shock resistance | 150 m/s2, in each 6 directions 3 times |
| Ambient temperature (Operating) | -10 to 50 ? |
| Ambient temperature (Storage) | -25 to 65 ? |
| Ambient humidity (OperatingStorage) | 25 to 85% |
| Cooling fan | No |
| Weight | 450 g max. |
The Omron S8TS-03012 Power Supply provides 30 W rated power with a 12 VDC output and 2.5 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for structured panel installation. Typical efficiency is specified at 73% with both 100 VAC and 200 VAC input. These electrical values define a 12 VDC supply where connected equipment should require 12 VDC and keep total current demand within the rated 2.5 A output. Input-source compatibility, DIN rail space, and terminal access should also be considered when planning installation.
The incoming AC range defines which source can feed the unit, while the 12 VDC output determines compatibility with downstream equipment. Comparing this model with the 5 VDC version should begin with load-voltage requirements because the two units serve different nominal output classes. The 5 VDC model provides a higher current rating but is not a direct substitute for equipment requiring 12 VDC. For a lower-voltage DIN rail configuration providing 5 VDC at 5 A, compare the Omron S8TS-02505.


