+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8JX-P60024N Power Supply

Omron S8JX-P60024N SMPS is a 600 W switch mode power supply configured to provide 24 VDC with a rated output current of 27 A. It accepts 100 to 240 VAC input at 50/60 Hz and supports an additional 80 to 370 VDC input range. Front mounting supports fixed panel installation, while screw terminals and terminal blocks provide the electrical connections between the source and DC output circuit. Typical efficiency is specified at 78% with both 100 VAC and 200 VAC input. The 24 VDC output and 27 A rating place this model among the higher-current 24 VDC configurations in the series. Within the S8JX-P Series, the S8JX-P60024N provides a front-mount 600 W, 24 VDC configuration. Compare other 600W 24V power supplies from Omron automation equipment.

Omron S8JX-P60024N Power Supply
BrandOmron
ProductPower Supply
Model NumberS8JX-P60024N

Omron S8JX-P60024N Power Supply - Technical Specifications

SpecificationValue
Power rating600 W
Output voltage24 VDC
Rated output current27 A
Terminal typeScrew Terminal
Mounting methodFront mounting
ConnectionTerminal blocks
Efficiency78% typ. (at 100 VAC input) 78% typ. (at 200 VAC input)
Rated input voltage100 to 240 VAC
Rated input current8.7 A max. (at 100 VAC input) 4.3 A max. (at 200 VAC input)
Input Leakage current0.5 mA max. (at 100 VAC input) 1.0 mA max. (at 200 VAC input)
Input Frequency50/60Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15% With V.ADJ
Start-up time1000 ms typ. (at 100 VAC input) 1000 ms typ. (at 200 VAC input)
Hold time20 ms min. (at 100 VAC input) 20 ms min. (at 200 VAC input)
Vibration resistance10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-10 to 70 ?
Ambient temperature (Storage)-25 to 75 ?
Ambient humidity (OperatingStorage)25 to 85%
Cooling fanYes
Weight1800 g max.

The Omron S8JX-P60024N Power Supply provides 600 W rated power with a 24 VDC output and 27 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and also supports 80 to 370 VDC input. Front mounting, screw terminals, and terminal blocks provide the installation and wiring arrangement for fixed panel integration. Typical efficiency is specified at 78% with both 100 VAC and 200 VAC input. These ratings define a 24 VDC higher-current supply where connected equipment voltage, total load current, source compatibility, available mounting space, and wiring access should be checked together. Combined load demand should remain within the rated 27 A output.

The supported input range determines which incoming source can be used, while the 24 VDC output rating determines compatibility with downstream equipment. A lower-power model can use the same 24 VDC output while providing less available current, so selection should be based on actual load demand rather than output voltage alone. Comparing equal-voltage models therefore helps determine the required current margin. For a 300 W front-mount model delivering 24 VDC at 14 A, compare the Omron S8JX-P30024C.