Omron S8FS-G60048C Power Supply
Omron S8FS-G60048C SMPS is a 600 W switch mode power supply configured to provide 48 VDC with a rated output current of 13 A. It accepts 100 to 240 VAC input at 50/60 Hz and uses direct mounting with screw terminals for fixed electrical-panel installation. Typical efficiency is specified at 88% with 100 VAC input and 92% with both 200 VAC and 230 VAC input. The 48 VDC output differentiates this model from lower-voltage configurations in the same power class, while the 13 A rating defines its available current capacity. Within the S8FS-G Series, the S8FS-G60048C provides a direct-mount 600 W, 48 VDC configuration. Compare other 48V power supplies from Omron automation equipment.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8FS-G60048C |
Omron S8FS-G60048C Power Supply - Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 600 W |
| Output voltage | 48 VDC |
| Rated output current | 13 A |
| Terminal type | Screw Terminal |
| Mounting method | Direct Mounting |
| Connection | Terminal blocks |
| Efficiency | 88 % typ.(at 100 VAC input) 92 % typ.(at 200 VAC input) 92 % typ.(at 230 VAC input) |
| Rated input voltage | 100 to 240 VAC |
| Rated input current | 7.7 A typ.(at 100 VAC input) 3.8 A typ.(at 200 VAC input) |
| Input Leakage current | 0.5 mA max.(at 100 VAC input) 1 mA max.(at 200 VAC input) |
| Input Frequency | 50/60 Hz |
| Output indicator | Yes (color: green) |
| Output voltage variable range | -10 to +15 % (With V.ADJ) |
| Start-up time | 1000 ms max.(at 100 VAC input) 1000 ms max.(at 200 VAC input) |
| Hold time | 30 ms typ.(at 100 VAC input) 30 ms typ.(at 200 VAC input) |
| Vibration resistance | 10 to 55 Hz, 4.5 G max., 0.375 mm single amplitude in each 3 directions for 2 hours |
| Shock resistance | 150 m/s2, in each 6 directions 3 times |
| Ambient temperature (Operating) | -20 to 70 ? |
| Ambient temperature (Storage) | -25 to 75 ? |
| Ambient humidity (OperatingStorage) | 90 %RH max. |
| Cooling fan | Yes |
| Weight | 1050 g max. |
The Omron S8FS-G60048C Power Supply provides 600 W rated power with a 48 VDC output and 13 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses direct mounting with screw terminals and terminal blocks for fixed panel installation. Typical efficiency is specified at 88% with 100 VAC input and 92% with both 200 VAC and 230 VAC input. These specifications establish the model within the 48 VDC class, where nominal load voltage should be confirmed before current capacity, incoming source, or mounting method is evaluated. The connected equipment should specifically operate from 48 VDC and keep total current demand within the stated 13 A rating. Direct mounting requires sufficient fixed panel area for installation.
Screw terminals provide the source and load connection points, while the input range should be checked independently from the 48 VDC output requirement. Comparing models within the same 48 VDC class gives clearer capacity context because nominal voltage remains unchanged even when power rating, current, and mounting vary. A lower-capacity model can therefore show the difference between high- and low-current options. For a 75 W DIN rail 48 VDC configuration supplying 1.6 A, compare the Omron S8FS-C07548.


