Omron S8FS-G60024CD-500 Power Supply
Omron S8FS-G60024CD-500 SMPS is a 600 W switch mode power supply configured to provide 24 VDC with a rated output current of 27 A. It uses single-phase input, DIN track mounting, screw terminals, and terminal blocks for structured control-panel installation. Rated input is 100 to 240 VAC, while allowable input extends from 85 to 264 VAC and 120 to 350 VDC. Typical efficiency is specified at 85% with 100 VAC input, 89% with 200 VAC input, and 90% with 230 VAC input. The covered construction defines the physical configuration of this version. Within the S8FS-G Series, the S8FS-G60024CD-500 provides a DIN track 600 W, 24 VDC configuration. Compare other 600W SMPS models from Omron industrial automation.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8FS-G60024CD-500 |
Omron S8FS-G60024CD-500 Power Supply – Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 600 W |
| Output voltage | 24 VDC |
| Rated output current | 27 A |
| Terminal type | Screw terminal |
| Phase | Single-phase |
| Mounting method | DIN track mounting |
| Construction | Covered type |
| Connection | Terminal blocks |
| Efficiency | 85 % typ. (at 100 VAC input) 89 % typ. (at 200 VAC input) 90 % typ. (at 230 VAC input) |
| Rated input voltage | 100 to 240 VAC |
| Rated input current | 7.7 A typ. (at 100 VAC input) 3.8 A typ. (at 200 VAC input) |
| Input Leakage current | 0.5 mA max. (at 100 VAC input) 1 mA max. (at 200 VAC input) |
| Input Frequency | 50/60Hz (47 to 63 Hz) |
| Allowable input voltage variable range | 85 to 264 VAC (Single-phase) 120 to 350 VDC |
| Overvoltage protection | Yes, Shut off the input voltage and turn on the input again |
| Parallel operation | No (However, backup operation is possible, external diodes required.) |
| Output indicator | Yes (color: green) |
| Output voltage variable range | -10 to +15 % (With V.ADJ) |
| Hold time | 30 ms typ. (at 100 VAC input) 30 ms typ. (at 200 VAC input) |
| Vibration resistance | 10 to 55 Hz, 4.5 G max., 0.375 mm Single amplitude in each 3 directions for 2 hours |
| Shock resistance | 150 m/s2, in each 6 directions 3 times |
| Ambient temperature (Operating) | -20 to 70 ? |
| Ambient temperature (Storage) | -25 to 75 ? (with no freezing or condensation) |
| Ambient humidity (OperatingStorage) | 90 %RH max. |
| Cooling fan | Cooling fan Yes |
| Weight (Main) | 1050 g max. |
The Omron S8FS-G60024CD-500 Power Supply provides 600 W rated power with a 24 VDC output and 27 A rated current. It uses single-phase input, DIN track mounting, screw terminals, terminal blocks, and a covered construction for structured cabinet installation. Rated input is 100 to 240 VAC, while allowable input ranges extend from 85 to 264 VAC and 120 to 350 VDC. Typical efficiency is specified at 85% with 100 VAC input, 89% with 200 VAC input, and 90% with 230 VAC input. These values establish the model as a high-capacity DIN track 24 VDC configuration where load voltage and current should be confirmed before source and installation conditions are assessed. Connected equipment should remain within the 27 A rating.
DIN track mounting requires sufficient rail space, while screw-terminal accessibility should be considered during conductor routing. The allowable AC and DC input ranges determine source compatibility independently from the nominal output requirement. Comparing another DIN track model with the same 24 VDC output provides useful capacity context because mounting and voltage remain consistent while wattage and current change. For a lower-capacity 100 W DIN track model that also provides 24 VDC but supplies 4.5 A, compare the Omron S8FS-G10024CD-500.


