+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-G60024C-H Power Supply

Omron S8FS-G60024C-H SMPS is a 600 W switch mode power supply configured to provide 24 VDC with a rated output current of 27 A. It accepts 100 to 240 VAC input at 50/60 Hz and uses direct mounting with screw terminals for fixed panel installation. Typical efficiency is specified at 85% with 100 VAC input, 89% with 200 VAC input, and 90% with 230 VAC input. The high-current 24 VDC output defines this model within the upper-capacity section of the S8FS-G range, while terminal blocks provide the fixed wiring interface. Within the S8FS-G Series, the S8FS-G60024C-H provides a direct-mount 600 W, 24 VDC configuration. Compare other high-current 24V SMPS models from Omron control solutions.

Omron S8FS-G60024C-H Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-G60024C-H

Omron S8FS-G60024C-H Power Supply - Technical Specifications

SpecificationValue
Power rating600 W
Output voltage24 VDC
Rated output current27 A
Terminal typeScrew Terminal
Mounting methodDirect Mounting
ConnectionTerminal blocks
Efficiency85 % typ.(at 100 VAC input) 89 % typ.(at 200 VAC input) 90 % typ.(at 230 VAC input)
Rated input voltage100 to 240 VAC
Rated input current7.7 A typ.(at 100 VAC input) 3.8 A typ.(at 200 VAC input)
Input Leakage current0.5 mA max.(at 100 VAC input) 1 mA max.(at 200 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15 % (With V.ADJ)
Start-up time1000 ms max.(at 100 VAC input) 1000 ms max.(at 200 VAC input)
Hold time40 ms typ.(at 100 VAC input) 40 ms typ.(at 200 VAC input)
Vibration resistance10 to 55 Hz, 4.5 G max., 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-20 to 70 ?
Ambient temperature (Storage)-25 to 75 ?
Ambient humidity (OperatingStorage)90 %RH max.
Cooling fanYes
Weight1050 g max.

The Omron S8FS-G60024C-H Power Supply provides 600 W rated power with a 24 VDC output and 27 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses direct mounting with screw terminals and terminal blocks for fixed electrical-panel installation. Typical efficiency is specified at 85% with 100 VAC input, 89% with 200 VAC input, and 90% with 230 VAC input. These specifications define a high-current 24 VDC configuration where nominal load voltage, current demand, incoming source, panel area, and wiring access should be checked independently. The connected equipment should specifically require 24 VDC and keep its combined current demand within the 27 A rated output capacity. Direct mounting determines the physical installation format.

The 100 to 240 VAC input range describes source-side compatibility separately from the 24 VDC output requirement, while screw terminals provide fixed points for incoming and outgoing conductors. Comparing a lower-capacity 24 VDC model gives stronger selection context because voltage compatibility remains unchanged. Mounting differences should then be considered according to the available cabinet layout. For a 150 W DIN rail configuration supplying the same 24 VDC output at 6.5 A, compare the Omron S8FS-G15024CD.