+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-G30012CD Power Supply

Omron S8FS-G30012CD SMPS is a 300 W switch mode power supply configured to provide 12 VDC with a rated output current of 25 A. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals for structured electrical-panel installation. Typical efficiency is specified at 81% with 100 VAC input and 85% with both 200 VAC and 230 VAC input. The DIN rail format differentiates this version from the direct-mount model while retaining the same 12 VDC output and current capacity. Rail space and wiring access therefore become key installation factors. Within the S8FS-G Series, the S8FS-G30012CD provides a DIN rail 300 W, 12 VDC configuration. Compare other DIN rail power supplies from Omron control products.

Omron S8FS-G30012CD Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-G30012CD

Omron S8FS-G30012CD Power Supply - Technical Specifications

SpecificationValue
Power rating300 W
Output voltage12 VDC
Rated output current25 A
Terminal typeScrew Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency81 % typ.(at 100 VAC input) 85 % typ.(at 200 VAC input) 85 % typ.(at 230 VAC input)
Rated input voltage100 to 240 VAC
Rated input current4.2 A typ.(at 100 VAC input) 2.1 A typ.(at 200 VAC input)
Input Leakage current0.5 mA max.(at 100 VAC input) 1 mA max.(at 200 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15 % (With V.ADJ)
Start-up time1000 ms max.(at 100 VAC input) 1000 ms max.(at 200 VAC input)
Hold time30 ms typ.(at 100 VAC input) 30 ms typ.(at 200 VAC input)
Vibration resistance10 to 55 Hz, 4.5 G max., 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-20 to 70 ?
Ambient temperature (Storage)-25 to 75 ?
Ambient humidity (OperatingStorage)90 %RH max.
Cooling fanYes
Weight700 g max.

The Omron S8FS-G30012CD Power Supply provides 300 W rated power with a 12 VDC output and 25 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals for structured control-panel installation. Typical efficiency is specified at 81% with 100 VAC input and 85% with both 200 VAC and 230 VAC input. These specifications define the model as a higher-current DIN rail 12 VDC supply where voltage requirement, output demand, rail space, source compatibility, and wiring access should be evaluated together. The connected equipment should require 12 VDC and keep combined current demand within the 25 A rated output. DIN rail mounting requires sufficient rail length, while terminal access should be included in cabinet planning.

The incoming AC range describes source-side compatibility independently from the 12 VDC requirement of connected loads. A comparison with a different voltage class should begin with voltage compatibility because wattage alone does not indicate interchangeability. Models with identical power ratings but different output voltages instead illustrate how current capacity changes across the series. For a 300 W direct-mount configuration that changes nominal output to 48 VDC and provides 7 A rated current, compare the Omron S8FS-G30048C.