+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-G30024C Power Supply

Omron S8FS-G30024C SMPS is a 300 W switch mode power supply designed to provide 24 VDC for industrial control equipment. It delivers 14 A rated output current and accepts 100 to 240 VAC input at 50/60 Hz. Direct mounting supports fixed installation inside electrical panels, while screw terminals provide input and output wiring connections. Typical efficiency is specified at 82% with 100 VAC input and 87% with both 200 VAC and 230 VAC input. The 24 VDC output and 14 A current capacity position this model as a higher-power option within a commonly used industrial voltage class. Within the S8FS-G Series, the S8FS-G30024C provides a direct-mount 300 W, 24 VDC configuration. Compare other 300W 24V power supplies from Omron machine control.

Omron S8FS-G30024C Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-G30024C

Omron S8FS-G30024C Power Supply - Technical Specifications

SpecificationValue
Power rating300 W
Output voltage24 VDC
Rated output current14 A
Terminal typeScrew Terminal
Mounting methodDirect Mounting
ConnectionTerminal blocks
Efficiency82 % typ.(at 100 VAC input) 87 % typ.(at 200 VAC input) 87 % typ.(at 230 VAC input)
Rated input voltage100 to 240 VAC
Rated input current4.2 A typ.(at 100 VAC input) 2.1 A typ.(at 200 VAC input)
Input Leakage current0.5 mA max.(at 100 VAC input) 1 mA max.(at 200 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15 % (With V.ADJ)
Start-up time1000 ms max.(at 100 VAC input) 1000 ms max.(at 200 VAC input)
Hold time30 ms typ.(at 100 VAC input) 30 ms typ.(at 200 VAC input)
Vibration resistance10 to 55 Hz, 4.5 G max., 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-20 to 70 ?
Ambient temperature (Storage)-25 to 75 ?
Ambient humidity (OperatingStorage)90 %RH max.
Cooling fanYes
Weight700 g max.

The Omron S8FS-G30024C Power Supply provides 300 W rated power with a 24 VDC output and 14 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses direct mounting with screw terminals for fixed electrical-panel installation. Typical efficiency is specified at 82% with 100 VAC input and 87% with both 200 VAC and 230 VAC input. These specifications position the model in the 24 VDC class, where load voltage, current demand, incoming source, panel surface, and wiring access should be considered together. The connected equipment should specifically require 24 VDC and keep its combined current demand within the stated 14 A output capacity. Direct mounting requires adequate panel area, while screw terminals establish the connection arrangement.

The incoming AC range should be matched to the available source independently from the 24 VDC requirement on the load side. When selecting between models, keeping nominal output voltage and mounting method constant gives the clearest capacity comparison. Lower-power direct-mount models can therefore show whether the 14 A capacity of this 300 W unit is necessary for the connected load. For a 150 W direct-mount configuration providing 24 VDC at 6.5 A, compare the Omron S8FS-G15024C.