Omron S8FS-C35012 Power Supply
Omron S8FS-C35012 SMPS is a 350 W switch mode power supply configured to provide 12 VDC with a rated output current of 29 A. It uses single-phase input, direct mounting, and screw terminals for fixed panel installation. The metal-frame unit has a stated efficiency of 85% and supports 100 to 240 VAC rated input, with allowable ranges of 90 to 264 VAC and 254 to 373 VDC. Its enclosure measures 50 mm wide, 112.5 mm high, and 212 mm deep, while the terminal block faces upward. Within the S8FS-C Series, the S8FS-C35012 provides a direct-mount 350 W, 12 VDC configuration. Compare other high-current 12V SMPS models from Omron industrial controls.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8FS-C35012 |
Omron S8FS-C35012 Power Supply – Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 350W |
| Output voltage | 12V |
| Rated output current | 29A |
| Terminal type | Screw |
| Phase | Single |
| Number of output branches | 1 |
| Allowable supply voltage DC | 254-373 V |
| Mounting method | Direct mounting |
| Type | Metal frame |
| Efficiency | 85% |
| Temperature range | -20-60? |
| Rated supply voltage at AC 50 Hz | 100-240V |
| Height | 50mm |
| Width | 112.5mm |
| Depth | 212mm |
| Features | Terminal block facing upward |
| Allowable supply voltage AC | 90-264 V |
The Omron S8FS-C35012 Power Supply provides 350 W rated power with a 12 VDC output and 29 A rated current. It uses single-phase input, direct mounting, and screw terminals for fixed panel installation. Rated input is 100 to 240 VAC, while allowable ranges extend from 90 to 264 VAC and 254 to 373 VDC. The metal-frame unit has a stated efficiency of 85%. Its enclosure measures 50 mm wide, 112.5 mm high, and 212 mm deep, with the terminal block facing upward. These specifications position the model as a high-current 12 VDC supply where load demand, panel space, enclosure depth, input source, and wiring clearance should be considered together.
The connected equipment should require 12 VDC and remain within the 29 A rated current. Direct mounting requires adequate panel surface, while the 212 mm enclosure depth should be confirmed before installation. The upward-facing terminal block also needs sufficient conductor clearance. Keeping output voltage at 12 VDC allows a clearer comparison of available current and wattage. For a lower-capacity direct-mount configuration that supplies 12 VDC at 8.5 A from a 100 W rating, compare the Omron S8FS-C10012.


